Quartz Crystal Resonator HC49USSMD Model KYX KBD1128A2030 for Electronic Frequency Control Solutions
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
(Quartz Crystal Resonator)
Product Overview: This specification document details the HC-49USSMD quartz crystal resonator from Shenzhen Kaiyuexiang Electronics Co., Ltd. Designed for electronic applications, this component offers precise frequency control with specific electrical and mechanical characteristics.
Product Attributes
- Brand: (Kaiyuexiang)
- Origin: (Shenzhen Kaiyuexiang Electronics Co., Ltd.)
- Product Name: (Quartz Crystal Resonator)
- Product Model: HC-49USSMD
- Original Manufacturer Model: KBD1128A2030
Technical Specifications
| Parameter | Specification | Unit | Notes |
|---|---|---|---|
| General Specifications | |||
| Holder Type | HC-49USSMD | ||
| Mode of Vibration | FUND S&A | ||
| Oscillation Mode | AT CUT | ||
| Storage Temperature | -40 to +85 | ||
| Driver Level | 100 | W | |
| Electrical Parameters | |||
| Normal Frequency | 11.2896 | MHz | |
| Frequency Tolerance (252) | 30 | ppm | |
| Temperature Stability | 20 | ppm | |
| Operating Temperature Range | -20 to +70 | ||
| Load Capacitance | 20 | PF | |
| Motional Capacitance | 3 | PF MAX | |
| Shunt Capacitance | |||
| Effective Series Resistance | 80 | MAX | |
| Insulation Resistance | 500 | M OHMS MIN | AT DC 100V |
| Mechanical Parameters | |||
| Solderability | 95% Coverage | BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Shock Resistance | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| Vibration Resistance | Electrical characteristics shall be satisfied after supplying following Vibration: Frequency 10-55Hz, Period 1-2min, Full Amplitude 1.5mm P-P, Direction X.Y.Z, Time 2 hours/each direction. | ||
| Strength of Terminals/Lead-wires (Pulling) | No visual damages after applying 900g tension weight for 30 sec. | ||
| Strength of Terminals/Lead-wires (Bending) | No visual damages after 90 degree bending with 225g tension weight. | ||
| Sealing Tightness | No gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| Soldering Dip | Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | Dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. (After applying ROSIN flux) | |
| Solder Heating | Electrical characteristics shall be satisfied after dipping. | Dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. | |
| Environmental Endurance | |||
| Humidity Resistance | Electrical characteristics shall be satisfied after 250 hours at 602 in 90-95% humidity. | ||
| Storage in Low Temperature | Electrical characteristics shall be satisfied after 250 hours at -302. | ||
| Storage in High Temperature | Electrical characteristics shall be satisfied after 250 hours at +852. | ||
| Temperature Cycle | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift 1/min. | ||
Contact Information:
Company: (Shenzhen Kaiyuexiang Electronics Co., Ltd.)
Factory Address: (4th Floor, Building 1, Caifa Industrial City, Renmin Road, Guanlan, Longhua District, Shenzhen)
TEL: 0755-89315823, 89315866
FAX: 0755-89315223
Website: www.kaiyuexiang.com
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina