13.560 MHz Crystal Oscillator Model KYX KSB135602030 with AT CUT Oscillation Mode and FUND S A Vibration Mode
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
49USSSMD/13.560MHZ
- : (Kaiyuexiang)
- :
- :
- : 49USSSMD/13.560MHZ
- : KSB135602030
| (Normal Frequency) | 13.560 | MHz | |
| (Frequency Tolerance @ 252) | 30 | ppm | |
| (Temperature Stability) | 20 | ppm | |
| (Operating Temperature Range) | -20 to +70 | ||
| (Load Capacitance) | 20 | PF | |
| (Motional Capacitance) | 7 | PF | MAX |
| (Effective Series Resistance) | 80 | MAX | |
| (Insulation Resistance) | 500 | M OHMS | MIN @ DC 100V |
| (Driver Level) | 100 | W | |
| (Mode of Vibration) | FUND S&A | KH-1240 | |
| (Oscillation Mode) | AT CUT | ||
| (Holder Type) | 49USSSMD | ||
| (Storage Temperature) | -40 to +85 | ||
| (Solderability) | 95% Coverage by using 90/10 Sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 flux for 5 sec. | ||
| (Shock) | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| (Vibration) | Frequency: 10-55Hz, Amplitude: 1.5mm P-P, Duration: 2 hours/each direction (X.Y.Z) | Electrical characteristics shall be satisfied. | |
| - (Strength of Terminals/Lead-wires - Pulling) | 900g tension weight for 30 sec. | No visual damages. | |
| - (Strength of Terminals/Lead-wires - Bending) | 90 degree bending with 225g tension weight. | No visual damages. | |
| (Sealing Tightness) | No gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| (Soldering Dip) | Dipped into solder melted tank at +2305 for 3 sec. Depth: 2mm from bottom of body. Soldering portion >90% coverage. | (After applying ROSIN flux) | |
| (Solder Heating) | Dipped into solder melted tank at +35010 for 3-4 sec. Depth: 2mm from edge of terminals/lead-wires. | Electrical characteristics shall be satisfied. | |
| (Humidity) | Electrical characteristics shall be satisfied after 250 hours at 602, 90-95% RH. | ||
| (Storage in Low Temperature) | Electrical characteristics shall be satisfied after 250 hours at -302. | ||
| (Storage in High Temperature) | Electrical characteristics shall be satisfied after 250 hours at +852. | ||
| (Temperature Cycle) | Electrical characteristics shall be satisfied after 3 cycles. Temperature shift rate: 1/min. | (Refer to Fig-2) |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina