Temperature Stable Crystal Oscillator 33.8688 MHz 20PF Capacitance 30ppm Frequency KYX KBD3386A2030

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

HC-49USSMD/33.8688 MHZ

20PF/30ppm

KBD3386A2030

0755-89315823 / 89315866
0755-89315223
www.kaiyuexiang.com


1. GENERAL
1.1 HOLDER TYPE	HC-49USSMD
1.2 MODE OF VIBRATION	AT CUT
1.3 OSCILLATION MODE	FUND S&A
1.4 TEST FACILITIES	KH-1240
1.5 STORAGE TEMPERATURE	-40TO +85
1.6 DRIVER LEVEL	100W
2. ELECTRICAL PARAMETER
2.1 NORMAL FREQUENCY	33.8688 MHz
2.2 FREQUENCY TOLERANCE252	30ppm
2.3 TEMPERATURE STABILITY	20ppm
2.4 OPERATING TEMPERATURE RANGE	-20TO + 70
2.5 LOAD CAPACITANCE	20 PF
2.6 MOTIONAL CAPACITANE	3PF MAX
2.7 SHUNT CAPACITANCE
2.8 EFFECTIVE SERIES RESISTANCE	40MAX
2.9 INSULATION RESISTANCE	500M OHMS MIN AT DC 100V
3. MECHANICAL PARAMETER
3.1 SOLDERABILITY	95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
MECHANICAL ENDURANCE
1 SHOCK	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
2 VIBRATION	Electrical characteristics shall be satisfied after supplying following Vibration. (1)VIBRATION FREQUENCY: 1055Hz (2)REPEATED PERIOD: 12min (3)FULL CYCLE: 1.5mm PP (4)DIRECTION: X.Y.Z (5)TIME: 2hours/each direction
3 STRENGTH OF TERMINALS/LEADWIRES	-1 PULLING: 900g tension weight for 30 sec. No visual damages. -2 BENDING: 90degree bending with 225gs tension weight. No visual damages.
4 SEALING TIGHTNESS	No observation of gas bubble after specimen put in hot water at +90+95for 5 min.
5 SOLDERING DIP	Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion over 90% coverage.
6 SOLDER HEATING	Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires.
ENVIRONMENTAL ENDURANCE
1 HUMIDITY	Electrical characteristics shall be satisfied after letting it alone at 602in humidity of 9095% for 250 hours.
2 STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at -302for 250 hours.
3 STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at +852for 250 hours.
4 TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min.