Quartz crystal resonator KYX KUS240001630 featuring 24 megahertz frequency and oscillation performance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification sheet details the HC-49SJJ/24.000MHZ Quartz Crystal Resonator from Shenzhen Kaiyuexiang Electronics Co., Ltd. Designed for precise frequency control, this component is suitable for various electronic applications requiring stable oscillation.

Product Attributes

Brand: Kaiyuexiang ()
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator ()
Product Model: HC-49SJJ/24.000MHZ
Original Model: KUS240001630
Technical Department: Dong Zongquan ()

Technical Specifications

Parameter	Specification	Unit	Notes
1. GENERAL
HOLDER TYPE	49US AT CUT
MODE OF VIBRATION	FUND S&A
OSCILLATION MODE	KH-1240
TEST FACILITIES
STORAGE TEMPERATURE	-40 TO +85
DRIVER LEVEL	100W	W
2. ELECTRICAL PARAMETER
NORMAL FREQUENCY	24.000	MHz
FREQUENCY TOLERANCE (252)	30ppm	ppm
TEMPERATURE STABILITY	20ppm	ppm
OPERATING TEMPERATURE RANGE	-20 TO +70
LOAD CAPACITANCE	16	PF
MOTIONAL CAPACITANCE	3PF MAX	PF
SHUNT CAPACITANCE		pF
EFFECTIVE SERIES RESISTANCE	40 MAX
INSULATION RESISTANCE	500M OHMS MIN	M	AT DC 100V
3. MECHANICAL PARAMETER
SOLDERABILITY	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
MECHANICAL ENDURANCE - SHOCK	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
MECHANICAL ENDURANCE - VIBRATION	Electrical characteristics shall be satisfied after supplying following Vibration: 1055Hz, 12min, 1.5mm PP, X.Y.Z direction, 2 hours/each direction
STRENGTH OF TERMINALS/LEADWIRES - PULLING	900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages after test.
STRENGTH OF TERMINALS/LEADWIRES - BENDING	90degree bending shall be given, being supplied 225gs tension weight. No visual damages after test.
SEALING TIGHTNESS	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
SOLDERING DIP	Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.		(After applying ROSIN flux)
SOLDER HEATING	Terminals/lead-wires shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth shall be 2mm from edge of terminals/lead-wires.
II ENVIRONMENTAL ENDURANCE
HUMIDITY	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min.		(Refer to Fig-2)