Electronic component KYX KUS3579A2030 quartz crystal resonator 3579545 MHz frequency tolerance 30 ppm

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification sheet details the Quartz Crystal Resonator, model 49US/3.579545MHZ, manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Manufacturer: Shenzhen Kaiyuexiang Electronics Co., Ltd.

Technical Specifications

Parameter	Specification	Unit
Product Name	Quartz Crystal Resonator
Product Model	49US/3.579545MHZ
Original Manufacturer Model	KUS3579A2030
Frequency	3.579545	MHz
Frequency Tolerance (252)	30	ppm
Temperature Stability	20	ppm
Operating Temperature Range	-20 to +70
Load Capacitance	20	PF
Motional Capacitance	5	PF MAX
Shunt Capacitance
Effective Series Resistance	250	MAX
Insulation Resistance	500	M OHMS MIN
Holder Type	49US
Mode of Vibration	AT CUT
Oscillation Mode	FUND
Test Facilities	S&A KH-1240
Storage Temperature	-40 to +85
Driver Level	100	W
Solderability	95% coverage by using 90/10 sold at 245 for 5 sec. Dipping after immersion in ALPHA 611 flux for 5 sec.
Mechanical Endurance - Shock	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
Mechanical Endurance - Vibration	Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2 hours/each direction
Mechanical Endurance - Strength of Terminals/Lead-wires - Pulling	900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages.
Mechanical Endurance - Strength of Terminals/Lead-wires - Bending	90degree bending with 225gs tension weight. No visual damages.
Mechanical Endurance - Sealing Tightness	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
Mechanical Endurance - Soldering Dip	Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
Mechanical Endurance - Solder Heating	Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires.
Environmental Endurance - Humidity	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
Environmental Endurance - Storage in Low Temperature	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
Environmental Endurance - Storage in High Temperature	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
Environmental Endurance - Temperature Cycle	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min.