Quartz Crystal Resonator KYX KUS270001030 Featuring 27 MHz Frequency for Circuit Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The HC-49SJJ/27.000MHZ is a Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control. This product specification document outlines its general, electrical, mechanical, and environmental characteristics.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: HC-49SJJ/27.000MHZ
Original Manufacturer Model: KUS270001030

Technical Specifications

Parameter	Value
Holder Type	49US AT CUT
Mode of Vibration	FUND S&A KH-1240
Oscillation Mode	-40TO +85
Storage Temperature	100W
Driver Level	27.000 MHz
Normal Frequency	30ppm
Frequency Tolerance (252)	20ppm
Temperature Stability	-20TO +70
Operating Temperature Range	10 PF
Load Capacitance	3PF MAX
Motional Capacitance	40 MAX
Shunt Capacitance	500M OHMS MIN AT DC 100V
Effective Series Resistance	95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Insulation Resistance	Provided that measurement shall be carried out after letting it alone in the room temperature for 1 hour.
Solderability	1055Hz
Shock Test	12min
Vibration Test Frequency	1.5mm PP
Vibration Test Period	X.Y.Z
Vibration Test Full Amplitude	2hours/each direction
Vibration Test Direction	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. After above test a), there is no observation of any visual damages on the specimen.
Vibration Test Time	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. After that, terminals/lead-wires shall be straightened gradually. Then the same bending and straightening shall be supplied to the opposite direction in the same axial. (Refer to Fig-1). After above test a), there is no observation of any visual damages on the specimen.
Strength of Terminals/Lead-Wires (Pulling)	There is no observation of gas bubble after specimen put in hot water at +90+95for 5 min.
Strength of Terminals/Lead-Wires (Bending)	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. (After applying ROSIN flux) Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
Sealing Tightness	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +1 +35010 for 3 sec. Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires.
Soldering Dip	Provided that measurement shall be carried out after letting it alone in the room temperature for 1 hour.
Solder Heating	Electrical characteristics shall be satisfied after letting it alone at 602in humidity of 9095% for 250 hours.
Environmental Endurance (Humidity)	Electrical characteristics shall be satisfied after letting it alone at -302for 250 hours.
Environmental Endurance (Storage in Low Temperature)	Electrical characteristics shall be satisfied after letting it alone at +852for 250 hours.
Environmental Endurance (Storage in High Temperature)	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min (Refer to Fig-2).
Environmental Endurance (Temperature Cycle)