High Stability Quartz Crystal Resonator KYX KUS138241010 Operating at 13824 MHz with 10ppm Tolerance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Quartz Crystal Resonator
This specification document, comprising 5 pages in total, details the Quartz Crystal Resonator, model 49US/13.824MHZ. It is designed for applications requiring precise frequency control, with key parameters including a load capacitance of 10PF and a frequency tolerance of 10ppm.
Product Attributes
- Brand: Kaiyuexiang ()
- Origin: Shenzhen, China
- Manufacturer: Shenzhen Kaiyuexiang Electronics Co., Ltd.
- Website: www.kaiyuexiang.com
Technical Specifications
| Parameter | Value | Unit | Notes |
|---|---|---|---|
| 1. GENERAL | |||
| HOLDER TYPE | 49US | ||
| MODE OF VIBRATION | AT CUT | ||
| OSCILLATION MODE | FUND S&A | ||
| TEST FACILITIES | KH-1240 | ||
| STORAGE TEMPERATURE | -40 to +85 | ||
| DRIVER LEVEL | 100 | W | |
| 2. ELECTRICAL PARAMETER | |||
| NORMAL FREQUENCY | 13.824 | MHz | |
| FREQUENCY TOLERANCE (252) | 10 | ppm | |
| TEMPERATURE STABILITY | 20 | ppm | |
| OPERATING TEMPERATURE RANGE | -20 to +70 | ||
| LOAD CAPACITANCE | 10 | PF | |
| MOTIONAL CAPACITANCE | 5 | PF MAX | |
| SHUNT CAPACITANCE | |||
| EFFECTIVE SERIES RESISTANCE | 60 | MAX | |
| INSULATION RESISTANCE | 500 | M OHMS MIN AT DC 100V | |
| 3. MECHANICAL PARAMETER | |||
| SOLDERABILITY | 95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | ||
| Mechanical Endurance | |||
| SHOCK | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| VIBRATION | Electrical characteristics shall be satisfied after supplying following Vibration. (Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2hours/each direction) | ||
| STRENGTH OF TERMINALS/LEADWIRES (PULLING) | Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages. | ||
| STRENGTH OF TERMINALS/LEADWIRES (BENDING) | Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. Then straightened gradually. Supplied to the opposite direction in the same axial. No visual damages. | ||
| SEALING TIGHTNESS | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| SOLDERING DIP | Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | ||
| SOLDER HEATING | Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires in solder melted tank at +35010 for 3 sec. | ||
| Environmental Endurance | |||
| HUMIDITY | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | ||
| STORAGE IN LOW TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | ||
| STORAGE IN HIGH TEMPERATURE | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | ||
| TEMPERATURE CYCLE | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min. | ||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina