Precision Electronic Component KYX KUS1105A2030 11.0592 MHz Crystal Oscillator 20pf Load Capacitance
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
49US/11.0592MHZ
KUS1105A2030
(Kaiyuexiang)
49US49US/11.0592MHZ11.0592MHZ20PF30ppm252
- (Kaiyuexiang)
- TEL0755-89315823 89315866, FAX0755-89315223
- www.kaiyuexiang.com
| 1. GENERAL | ||
| HOLDING TYPE | 49US | |
| MODE OF VIBRATION | AT CUT | |
| OSCILLATION MODE | FUND S&A | |
| TEST FACILITIES | KH-1240 | |
| STORAGE TEMPERATURE | -40TO +85 | |
| DRIVER LEVEL | 100W | |
| 2. ELECTRICAL PARAMETER | ||
| NORMAL FREQUENCY | 11.0592 MHz | |
| FREQUENCY TOLERANCE252 | 30ppm | |
| TEMPERATURE STABILITY | 20ppm | |
| OPERATING TEMPERATURE RANGE | -20TO +70 | |
| LOAD CAPACITANCE | 20 PF | |
| MOTIONAL CAPACITANCE | 3PF MAX | |
| SHUNT CAPACITANCE | ||
| EFFECTIVE SERIES RESISTANCE | 80 MAX | |
| INSULATION RESISTANCE | 500M OHMS MIN AT DC 100V | |
| 3. MECHANICAL PARAMETER | ||
| SOLDERABILITY | 95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | |
| Mechanical Endurance | ||
| SHOCK | Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board. | |
| VIBRATION | (1)VIBRATION FREQUENCY 1055Hz (2)REPEATED PERIOD 12min (3)FULL CYCLE 1.5mm PP (4)DIRECTION X.Y.Z (5)TIME 2hours/each direction | Electrical characteristics shall be satisfied after supplying following Vibration. |
| STRENGTH OF TERMINALS/LEADWIRES | PULLING: 900g tension weight for 30 sec. BENDING: 90degree bending with 225gs tension weight. | -1, -2: After test, no visual damages on the specimen. |
| SEALING TIGHTNESS | No observation of gas bubble after specimen put in hot water at +90+95for 5 min. | |
| SOLDERING DIP | Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. | (After applying ROSIN flux) |
| SOLDER HEATING | Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. | Electrical characteristics shall be satisfied after dipping. |
| Environmental Endurance | ||
| HUMIDITY | Let alone at 602 in humidity of 9095% for 250 hours. | Electrical characteristics shall be satisfied. |
| STORAGE IN LOW TEMPERATURE | Let alone at -302 for 250 hours. | Electrical characteristics shall be satisfied. |
| STORAGE IN HIGH TEMPERATURE | Let alone at +852 for 250 hours. | Electrical characteristics shall be satisfied. |
| TEMPERATURE CYCLE | 3 cycles. Temperature shift from low to high, high to low shall be done in 1/min. | Electrical characteristics shall be satisfied. |
()
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina