Quartz Crystal Resonator HC 49USSMD 4194304 MHz Frequency Control KYX KSD4194A2030 Component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification outlines the details for the HC-49USSMD Quartz Crystal Resonator, a key component manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. This product is designed for applications requiring precise frequency control.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Model: HC-49USSMD/4.194304 MHZ
Original Manufacturer Model: KSD4194A2030

Technical Specifications

Parameter	Specification
Product Name	Quartz Crystal Resonator
Product Model	HC-49USSMD/4.194304 MHZ
Product Parameters	20PF/30ppm
Holder Type	HC-49USSMD
Mode of Vibration	AT CUT
Oscillation Mode	FUND S&A
Test Facilities	KH-1240
Storage Temperature	-40 TO +85
Driver Level	100W
Normal Frequency	4.194304 MHz
Frequency Tolerance (252)	30ppm
Temperature Stability	20ppm
Operating Temperature Range	-20 TO + 70
Load Capacitance	20 PF
Motional Capacitance	5PF MAX
Shunt Capacitance	N/A
Effective Series Resistance	250MAX
Insulation Resistance	500M OHMS MIN AT DC 100V
Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Mechanical Endurance - Shock	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
Mechanical Endurance - Vibration	Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2hours/each direction. Electrical characteristics shall be satisfied.
Mechanical Endurance - Strength of Terminals/Lead-Wires - Pulling	900g tension weight for 30 sec. No visual damages.
Mechanical Endurance - Strength of Terminals/Lead-Wires - Bending	90-degree bending with 225g tension weight, then straightening. Repeat in opposite direction. No visual damages.
Mechanical Endurance - Sealing Tightness	No gas bubble after specimen put in hot water at +90+95 for 5 min.
Mechanical Endurance - Soldering Dip	Terminals/lead-wires dipped into solder at +2305 for 3sec, depth 2mm from body. Over 90% coverage.
Mechanical Endurance - Solder Heating	Terminals/lead-wires dipped into solder at +35010 for 3-4 sec, 2mm from edge. Electrical characteristics shall be satisfied.
Environmental Endurance - Humidity	Electrical characteristics shall be satisfied after 250 hours at 602, 90-95% humidity.
Environmental Endurance - Storage in Low Temperature	Electrical characteristics shall be satisfied after 250 hours at -302.
Environmental Endurance - Storage in High Temperature	Electrical characteristics shall be satisfied after 250 hours at +852.
Environmental Endurance - Temperature Cycle	Electrical characteristics shall be satisfied after 3 cycles. Temperature shift rate: 1/min.