Precision 6 MHz HC49USSMD Crystal Oscillator with 20PF Load Capacitance and 30ppm Stability KYX KSD060002030

Name: Precision 6 MHz HC49USSMD Crystal Oscillator with 20PF Load Capacitance and 30ppm Stability KYX KSD060002030
Brand: Beijing Silk Road Enterprise Management Services Co., Ltd.

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

- HC-49USSMD/6.000 MHZ

HC-49USSMD/6.000 MHZ

: (Kaiyuexiang)
:
: HC-49USSMD/6.000 MHZ
: KSD060002030



	HC-49USSMD/6.000 MHZ
	20PF/30ppm
	KSD060002030
Holder Type	HC-49USSMD
Mode of Vibration	AT CUT
Oscillation Mode	FUND
Test Facilities	S&A KH-1240
Storage Temperature	-40TO +85
Driver Level	100W
Normal Frequency	6.000 MHz
Frequency Tolerance (252)	30ppm
Temperature Stability	20ppm
Operating Temperature Range	-20TO +70
Load Capacitance	20 PF
Motional Capacitance	5PF MAX
Shunt Capacitance
Effective Series Resistance	250MAX
Insulation Resistance	500M OHMS MIN	AT DC 100V
Solderability	95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Shock	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
Vibration	Electrical characteristics shall be satisfied after supplying following Vibration. (1)VIBRATION FREQUENCY 1055Hz (2)REPEATED PERIOD 12min (3)FULL CYCLE 1.5mm PP (4)DIRECTION X.Y.Z (5)TIME 2hours/each direction
Strength of Terminals/Lead-wires - Pulling	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. After above test a), there is no observation of any visual damages on the specimen.
Strength of Terminals/Lead-wires - Bending	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. After that, terminals/lead-wires shall be straightened gradually. Then the same bending and straightening shall be supplied to the opposite direction in the same axial. After above test a), there is no observation of any visual damages on the specimen.
Sealing Tightness	There is no observation of gas bubble after specimen put in hot water at +90+95for 5 min.
Soldering Dip	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. (After applying ROSIN flux) Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
Solder Heating	Terminals/lead-wires of specimen shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires.
Humidity	Electrical characteristics shall be satisfied after letting it alone at 602in humidity of 9095% for 250 hours.
Storage in Low Temperature	Electrical characteristics shall be satisfied after letting it alone at -302for 250 hours.
Storage in High Temperature	Electrical characteristics shall be satisfied after letting it alone at +852for 250 hours.
Temperature Cycle	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min.