Quartz Crystal Resonator KYX KMD160001230 16 MHz Frequency Control Component for Electronic Circuits

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification sheet details the M-49USSMD /16.000MHz Quartz Crystal Resonator, a high-quality electronic component designed for precise frequency control. Manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd., this resonator offers reliable performance with tight frequency tolerances and a wide operating temperature range, making it suitable for various electronic applications.

Product Attributes

Brand: Kaiyuexiang (KYX)
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Customer Confirmation Seal Area: Present
Certification Seal Area: Present

Technical Specifications

Parameter	Specification	Unit
Nominal Frequency	16.000	MHz
Mode of Oscillation	AT Cut
Frequency Tolerance	30	PPM
Temperature Tolerance	20	PPM
Operating Temperature Range	-20 to +70
Storage Temperature	-40 to +85
Equivalent Resistance	60
Load Capacitance	12	pF
Drive Level	100	W
Shunt Capacitance	3.0	pF
Insulation Resistance	500	M at DC 100V15V
Aging	3	ppm/year
Hold Type	M-49USSMD
Marking	KYX XX (Nominal Frequency)

Product Reliability

Item	Electrical Performance Conditions	Result
A. Environmental Tests	A.1 Low Temperature Resistance (-405 for 500 hrs 2 hrs)	()
	A.2 High Temperature Resistance (+1005 for 500 hrs 2 hrs)	()
	A.3 Salt Spray Test (352, 5% salt solution for 48 hrs 2 hrs)	()
	A.4 Humidity Test (602, 90-98% RH for 500 hrs 2 hrs)	()
	A.5 Temperature Cycling (-402 for 30 min 1 min to +852 for 30 min 1 min, 100 cycles)	()
B. Mechanical Performance	B.1 Drop Test (75cm5cm height onto 3cm wood board, 3 times)	()
	B.2 Vibration Test (10-55Hz, 1.5mm amplitude, along X, Y, Z axes for 2 hrs)	()
	B.3 Terminal Bending Strength Test (Body fixed, twist 45 degrees, then restore)	()
	B.4 Terminal Strength Test (On PCB, 0.5mm/s, 2mm bend, 5 sec 1 sec)	()
	B.5 Soldering Test (Flux 5 sec, 2305 solder pot for 3 sec)	()
	B.6 Sealing Test (855 warm water immersion for 5 min)	()
	B.7 Solder Heat Resistance (2655 tin pot, 2.00.2mm distance, 3 min (2 times); 35010 tin pot, 2.0mm0.2mm distance, 30.5 sec (2 times))	()

Judgment Standards

Result Code	Specification Requirement
()	Frequency Change: 5ppm; Resistance Change: 20%
()	No lead breakage and meets () requirements
()	Tin coverage rate >90%
()	No bubbles on crystal surface or emerging from water
()	Product appearance qualified