HC 49USSMD 26 MHz Crystal Oscillator Frequency Stability 10ppm Temperature Range KYX KBD260001210

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

HC-49USSMD/26.000 MHZ

		/

	HC-49USSMD
	FUND
	S&A
	KH-1240
	-40TO +85
	100W

	26.000 MHz
(252)	10ppm
	20ppm
	-20TO + 70
	12 PF
	3PF MAX

	40MAX
	500M OHMS MIN	AT DC 100V

	95%COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.

	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
	Electrical characteristics shall be satisfied after supplying following Vibration (1055Hz, 12min, 1.5mm PP, X.Y.Z, 2hours/each direction).
-	900g tension weight for 30 sec. No visual damages.
-	90degree bending with 225gs tension weight. No visual damages.
	No observation of gas bubble after specimen put in hot water at +90+95for 5 min.
	Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion over 90% coverage.
	Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. Electrical characteristics shall be satisfied.

	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift 1/min.