24 MHz Crystal Oscillator KYX KBD240002010 With 20 PF Load Capacitance For Electronic Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

HC-49USSMD/24.000 MHZ

KBD240002010

20PF/10ppm

0755-89315823 / 89315866

0755-89315223

www.kaiyuexiang.com


1. GENERAL
HOLDER TYPE	HC-49USSMD
MODE OF VIBRATION	FUND
OSCILLATION MODE	S&A
TEST FACILITIES	KH-1240
STORAGE TEMPERATURE	-40 TO +85
DRIVER LEVEL	100W
2. ELECTRICAL PARAMETER
NORMAL FREQUENCY	24.000 MHz
FREQUENCY TOLERANCE (252)	10ppm
TEMPERATURE STABILITY	20ppm
OPERATING TEMPERATURE RANGE	-20 TO +70
LOAD CAPACITANCE	20 PF
MOTIONAL CAPACITANCE	3pF MAX
SHUNT CAPACITANCE
EFFECTIVE SERIES RESISTANCE	40 MAX
INSULATION RESISTANCE	500M OHMS MIN AT DC 100V
3. MECHANICAL PARAMETER
SOLDERABILITY	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC.	DIPPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
MECHANICAL ENDURANCE
SHOCK	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
VIBRATION	Electrical characteristics shall be satisfied after supplying following Vibration.	(1)VIBRATION FREQUENCY: 1055Hz (2)REPEATED PERIOD: 12min (3)FULL CYCLE: 1.5mm PP (4)DIRECTION: X.Y.Z (5)TIME: 2hours/each direction
STRENGTH OF TERMINALS/LEAD-WIRES	PULLING: 900g tension weight for 30 sec. No visual damages.	BENDING: 90 degree bending with 225gs tension weight. No visual damages.
SEALING TIGHTNESS	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
SOLDERING DIP	Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from body. Soldering portion over 90% coverage.	(After applying ROSIN flux)
SOLDER HEATING	Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge.
ENVIRONMENTAL ENDURANCE
HUMIDITY	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift 1/min.	(Refer to Fig-2)