Quartz Crystal Resonator 12 MHz HC-49USSMD Frequency Stability KYX KBD120002220 Electronic Component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification sheet details the HC-49USSMD/12.000 MHZ Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency control.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: HC-49USSMD/12.000 MHZ
Original Model: KBD120002220

Technical Specifications

Parameter	Value	Unit	Notes
Normal Frequency	12.000	MHz
Frequency Tolerance (252)	20	ppm
Temperature Stability	20	ppm
Operating Temperature Range	-20 to +70
Load Capacitance	22	PF
Motional Capacitance	3	PF	MAX
Shunt Capacitance
Effective Series Resistance	80		MAX
Insulation Resistance	500	M OHMS	MIN AT DC 100V
Holder Type	HC-49USSMD		AT CUT
Mode of Vibration	FUND
Oscillation Mode	S&A		KH-1240
Test Facilities	-40TO +85		STORAGE TEMPERATURE
Driver Level	100	W
Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Shock Resistance	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
Vibration Resistance	Frequency: 1055Hz, Period: 12min, Full Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2 hours/each direction		Electrical characteristics shall be satisfied after supplying following Vibration.
Strength of Terminals/Lead-Wires (Pulling)	900g tension weight for 30 sec.		No visual damages after test.
Strength of Terminals/Lead-Wires (Bending)	90 degree bending with 225gs tension weight.		No visual damages after test.
Sealing Tightness	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
Soldering Dip	Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from bottom of body. Soldering portion over 90%.		(After applying ROSIN flux)
Solder Heating	Terminals/lead-wires dipped into solder at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires.		Electrical characteristics shall be satisfied after dipping.
Humidity Resistance	Electrical characteristics shall be satisfied after 250 hours at 602 in 90-95% humidity.
Storage in Low Temperature	Electrical characteristics shall be satisfied after 250 hours at -302.
Storage in High Temperature	Electrical characteristics shall be satisfied after 250 hours at +852.
Temperature Cycle	Electrical characteristics shall be satisfied after 3 cycles. Temperature shift 1/min.		(Refer to Fig-2)