Electronic Oscillator Component KYX KBD240002020 Quartz Crystal Resonator 24 MHz Frequency Stability

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The 49USSMD/24.000MHZ is a Quartz Crystal Resonator from Shenzhen Kaiyuexiang Industrial Co., Ltd. It is designed for oscillating applications and features specific electrical and mechanical parameters suitable for various electronic circuits.

Product Attributes

Brand: (Kaiyuexiang)
Origin: Shenzhen, China
Product Name: (Quartz Crystal Resonator)
Product Model: 49USSMD/24.000MHZ
Original Manufacturer Model: KBD240002020

Technical Specifications

Parameter	Value	Unit	Notes
Normal Frequency	24.000	MHz
Frequency Tolerance (252)	20	ppm
Temperature Stability	20	ppm
Operating Temperature Range	-20 to +70
Load Capacitance	20	PF
Motional Capacitance	7	PF	MAX
Shunt Capacitance
Effective Series Resistance	40		MAX
Insulation Resistance	500	M OHMS	MIN AT DC 100V
Holder Type	49USSMD		AT CUT FUND S&A KH-1240
Mode of Vibration
Oscillation Mode
Test Facilities
Storage Temperature	-40 to +85
Driver Level	100	W
Solderability	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Shock Resistance	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
Vibration Resistance	Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm PP, Direction: X.Y.Z, Time: 2 hours/each direction. Electrical characteristics shall be satisfied.
Strength of Terminals/Lead-Wires (Pulling)	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages after test.
Strength of Terminals/Lead-Wires (Bending)	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. Then straightened gradually. Same bending and straightening to the opposite direction. No visual damages after test.
Sealing Tightness	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
Soldering Dip	Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from bottom of specimens body. Soldering portion over 90% coverage.
Solder Heating Resistance	Terminals/lead-wires shall be dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. Electrical characteristics shall be satisfied.
Humidity Resistance	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
Low Temperature Storage	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
High Temperature Storage	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
Temperature Cycle	Electrical characteristics shall be satisfied after supplying temperature cycle (3 cycles). Temperature shift 1/min.