Precision Quartz Crystal Resonator KYX KUS135002020 49US Cut Lead 13500MHz Frequency Control Component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The KAIYUE XIANG 49US Quartz Crystal Resonator is designed for precise frequency control. This model, specified as 49US with cut leads and a frequency of 13.500MHz, offers a load capacitance of 20pF and a frequency tolerance of 20ppm, making it suitable for various electronic applications requiring stable oscillation.

Product Attributes

Brand: KAIYUE XIANG
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: 49US Cut Lead / 13.500MHz
Original Manufacturer Model: KUS135002020

Technical Specifications

Section	Parameter	Value	Notes
1. GENERAL	HOLDER TYPE	49US
	MODE VIBRATION	FUND
	OSCILLATION MODE	S&A
	TEST FACILITIES	KH-1240
	STORAGE TEMPERATURE	-40 TO +85
	DRIVER LEVEL	100W
2. ELECTRICAL PARAMETER	NORMAL FREQUENCY	13.500MHz
	FREQUENCY TOLERANCE (252)	20ppm
	TEMPERATURE STABILITY	20ppm
	OPERATING TEMPERATURE RANGE	-20 TO +70
	LOAD CAPACITANCE	20 PF
	MOTIONAL CAPACITANE	7PF MAX
	SHUNT CAPACITANCE
	EFFECTIVE SERIES RESISTANCE	40MAX
	INSULATION RESISTANCE	500M OHMS MIN	AT DC 100V
3. MECHANICAL PARAMETER	SOLDERABILITY	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
MECHANICAL ENDURANCE	SHOCK	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
	VIBRATION	Electrical characteristics shall be satisfied after supplying following Vibration.	1055Hz, 12min, 1.5mm PP, X.Y.Z directions, 2 hours/each direction
	STRENGTH OF TERMINALS/LEADWIRES (PULLING)	No visual damages after 900g tension weight for 30 sec.
	STRENGTH OF TERMINALS/LEADWIRES (BENDING)	No visual damages after 90 degree bending with 225gs tension weight.
	SEALING TIGHTNESS	No gas bubble after specimen put in hot water at +90+95 for 5 min.
	SOLDERING DIP	Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from body bottom.	Over 90% coverage. (With ROSIN flux)
	SOLDER HEATING	Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec.	Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires.
ENVIRONMENTAL ENDURANCE	HUMIDITY	Electrical characteristics shall be satisfied after 250 hours at 602 in 9095% humidity.
	STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after 250 hours at -302.
	STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after 250 hours at +852.
	TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after 3 cycles. Temperature shift 1/min.