Electronic Component KYX KUS2713B1530 27.13827 MHz AT Cut Oscillator with 20ppm Temperature Stability

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

49US/27.13827MHZ

: (Kaiyuexiang)
:
:
: 49US/27.13827MHZ
: KUS2713B1530


(HOLDER TYPE)	49US
(MODE OF VIBRATION)	AT CUT
(OSCILLATION MODE)	FUND S&A KH-1240
(NORMAL FREQUENCY)	27.13827 MHz
(FREQUENCY TOLERANCE @ 252)	30ppm
(TEMPERATURE STABILITY)	20ppm
(OPERATING TEMPERATURE RANGE)	-20 TO +70
(LOAD CAPACITANCE)	15 PF
(DRIVER LEVEL)	100W
(STORAGE TEMPERATURE)	-40 TO +85
(EFFECTIVE SERIES RESISTANCE)	40 MAX
(INSULATION RESISTANCE @ DC 100V)	500M OHMS MIN
(SOLDERABILITY)	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
- (MECHANICAL ENDURANCE - SHOCK)	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
- (MECHANICAL ENDURANCE - VIBRATION)	Frequency 1055Hz, Amplitude 1.5mm P-P, Direction X.Y.Z, Time 2hours/each direction. Electrical characteristics shall be satisfied.
- (MECHANICAL ENDURANCE - STRENGTH OF TERMINALS/LEAD-WIRES)	Pulling: 900g tension for 30 sec, no visual damages. Bending: 90degree bending with 225g tension, no visual damages.
- (MECHANICAL ENDURANCE - SEALING TIGHTNESS)	No gas bubble after specimen put in hot water at +90+95 for 5 min.
- (MECHANICAL ENDURANCE - SOLDERING DIP)	Terminals/lead-wires dipped into solder at +2305 for 3sec, dipping depth 2mm from body. Soldering portion over 90% coverage.
- (MECHANICAL ENDURANCE - SOLDER HEATING)	Terminals/lead-wires dipped into solder at +35010 for 3 sec, dipping depth 2mm from edge. Electrical characteristics shall be satisfied.
- (ENVIRONMENTAL ENDURANCE - HUMIDITY)	Electrical characteristics shall be satisfied after 250 hours at 602, 90-95% humidity.
- (ENVIRONMENTAL ENDURANCE - STORAGE IN LOW TEMPERATURE)	Electrical characteristics shall be satisfied after 250 hours at -302.
- (ENVIRONMENTAL ENDURANCE - STORAGE IN HIGH TEMPERATURE)	Electrical characteristics shall be satisfied after 250 hours at +852.
- (ENVIRONMENTAL ENDURANCE - TEMPERATURE CYCLE)	Electrical characteristics shall be satisfied after 3 cycles of temperature shift (low to high, high to low) at 1/min.