SAW Resonator KYX KTOR423 Featuring 423 Megahertz Frequency and Wide Temperature Range for Security

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

SAW Resonator

This specification covers the characteristics of a 1-port SAW resonator designed for use in remote-control security applications. It offers reliable performance within specified operating and storage temperature ranges.

Product Attributes

Brand: Kaiyuexiang ()
Origin: Shenzhen, China
Product Name: SAW Resonator
Product Model: T0-39/R423
Original Model: KTOR423

Technical Specifications

Item	Unit	Minimum	Typical	Maximum
ELECTRICAL SPECIFICATION
DC Voltage	VDC		10
AC Voltage	Vpp		10
Operation temperature		-20		+70
Storage temperature		-40		+85
RF Power Dissipation	dBm		0
Electronic Characteristics
Center Frequency	MHz	422.925	423	423.075
Insertion Loss	dB		1.5	2.5
Quality Factor Unload Q		5000	12800
Loaded Q (50)		1000	2000
Temperature Stability Turnover Temperature		10	25	40
Freq.temp.Coefficient	ppm/		0.032
Frequency Aging	ppm/yr
DC. Insulation Resistance	M	1.0
RF Equivalent RLC Model Motional Resistance R1			19	26
Motional Inductance L1	H		92.929
Motional Capacitance C1	fF		1.4475
Transducer Static Capacitance	pF		1.95

Environmental Characteristics

The device shall fulfill the specifications in 2.2 after undergoing the following tests:

High temperature exposure: Subject to +85 for 16 hours, then room conditions for 24 hours.
Low temperature exposure: Subject to -40 for 16 hours, then room conditions for 24 hours.
Temperature cycling: -45 for 30 minutes, +85 for 30 minutes, then room conditions for 24 hours.
Resistance to solder heat: Terminals dipped in solder bath at 260 10 for 101 sec (no closer than 1.5mm), then room conditions for 4 hours.
Solderability: Terminals dipped in solder bath at 2455 for 5s. More than 95% area of terminals must be covered with new solder.
Mechanical shock: Dropped randomly onto concrete floor from 1m height, 3 times.
Vibration: 1 hour each in x, y, and z axes with amplitude of 1.5 mm at 10 to 55 Hz.

Remarks

Static voltage: Avoid static voltage between signal load and ground as it may cause deterioration and destruction.
Ultrasonic cleaning: Avoid ultrasonic cleaning as it may cause deterioration and destruction.
Soldering: Only leads of the component may be soldered. Avoid soldering other parts of the component.

Factory Address: 4th Floor, Building 1, Caifa Industrial City, Renmin Road, Guanlan, Longhua District, Shenzhen, China

TEL: 0755-89315823 / 89315866

FAX: 0755-89315223

Website: www.kaiyuexiang.com