Precision 8 MHz Crystal Oscillator HC 49SJJ 8.000 MHz Model KYX KUS080001230 with Stable Frequency

Name: Precision 8 MHz Crystal Oscillator HC 49SJJ 8.000 MHz Model KYX KUS080001230 with Stable Frequency
Brand: Beijing Silk Road Enterprise Management Services Co., Ltd.

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

- HC-49SJJ/8.000MHZ

HC-49SJJ/8.000MHZ

: (Kaiyuexiang)
:
: HC-49SJJ/8.000MHZ
: KUS080001230
:


1. GENERAL
HOLDER TYPE	49US AT CUT
MODE OF VIBRATION	FUND S&A
OSCILLATION MODE	KH-1240
TEST FACILITIES
STORAGE TEMPERATURE	-40 TO +85
DRIVER LEVEL	100W
2. ELECTRICAL PARAMETER
NORMAL FREQUENCY	8.000	MHz
FREQUENCY TOLERANCE252	30	ppm
TEMPERATURE STABILITY	20	ppm
OPERATING TEMPERATURE RANGE	-20 TO +70
LOAD CAPACITANCE	12	PF
MOTIONAL CAPACITANCE	3	PF MAX
SHUNT CAPACITANCE
EFFECTIVE SERIES RESISTANCE	250	MAX
INSULATION RESISTANCE	500	M OHMS MIN	AT DC 100V
3. MECHANICAL PARAMETER
SOLDERABILITY	95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Mechanical Endurance
SHOCK	Electrical characteristics shall be satisfied after dropping three time from the height of 50 cm onto Hard wooden board.
VIBRATION	Electrical characteristics shall be satisfied after supplying following Vibration. (1)VIBRATION FREQUENCY 1055Hz (2)REPEATED PERIOD 12min (3)FULL CYCLE 1.5mm PP (4)DIRECTION X.Y.Z (5)TIME 2hours/each direction
STRENGTH OF TERMINALS/LEADWIRES	PULLING: 900g tension weight for 30 sec. No visual damages. BENDING: 90degree bending with 225gs tension weight. No visual damages.
SEALING TIGHTNESS	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
SOLDERING DIP	Terminals/lead-wires dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.		(After applying ROSIN flux)
SOLDER HEATING	Terminals/lead-wires dipped into solder melted tank at +35010 for 3 sec. Dipping depth 2mm from edge of terminals/lead-wires. Electrical characteristics shall be satisfied.
II ENVIRONMENTAL ENDURANCE
HUMIDITY	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
STORAGE IN LOW TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
STORAGE IN HIGH TEMPERATURE	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
TEMPERATURE CYCLE	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min.		(Refer to Fig-2)