High stability crystal oscillator KYX KUS035802030 49US 3.580 megahertz frequency with 30ppm tolerance

Name: High stability crystal oscillator KYX KUS035802030 49US 3.580 megahertz frequency with 30ppm tolerance
Brand: Beijing Silk Road Enterprise Management Services Co., Ltd.

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

49US/3.580MHZ
KUS035802030

(Kaiyuexiang)
, ()


1. GENERAL
HOLDING TYPE	49US
MODE OF VIBRATION	AT CUT
OSCILLATION MODE	FUND S&A
TEST FACILITIES	KH-1240
STORAGE TEMPERATURE	-40 TO +85
DRIVER LEVEL	100W
2. ELECTRICAL PARAMETER
NORMAL FREQUENCY	3.580 MHz
FREQUENCY TOLERANCE (252)	30ppm
TEMPERATURE STABILITY	20ppm
OPERATING TEMPERATURE RANGE	-20 TO +70
LOAD CAPACITANCE	20 PF
MOTIONAL CAPACITANCE	5PF MAX
SHUNT CAPACITANCE	250 MAX
EFFECTIVE SERIES RESISTANCE	500M OHMS MIN	AT DC 100V
INSULATION RESISTANCE	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
3. MECHANICAL PARAMETER
SOLDERABILITY	95% COVERAGE BY USING 90/10 SOLD AT 245 FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC.
Mechanical Endurance
SHOCK	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
VIBRATION	Frequency: 1055Hz, Period: 12min, Amplitude: 1.5mm P-P, Direction: X.Y.Z, Time: 2 hours/each direction	Electrical characteristics shall be satisfied after supplying following Vibration.
STRENGTH OF TERMINALS/LEAD-WIRES - PULLING	900g tension weight for 30 sec.	No visual damages on the specimen.
STRENGTH OF TERMINALS/LEAD-WIRES - BENDING	90 degree bending, 225gs tension weight, then straighten gradually. Repeat to opposite direction.	No visual damages on the specimen.
SEALING TIGHTNESS	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
SOLDERING DIP	Terminals/lead-wires dipped into solder at +2305 for 3sec. Dipping depth 2mm from body.	Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
SOLDER HEATING	Terminals/lead-wires dipped into solder at +35010 for 3 sec. Dipping depth 2mm from edge.	Electrical characteristics shall be satisfied.
Environmental Endurance
HUMIDITY	602, 9095% humidity for 250 hours.	Electrical characteristics shall be satisfied.
STORAGE IN LOW TEMPERATURE	-302 for 250 hours.	Electrical characteristics shall be satisfied.
STORAGE IN HIGH TEMPERATURE	+852 for 250 hours.	Electrical characteristics shall be satisfied.
TEMPERATURE CYCLE	3 cycles. Temperature shift 1/min.	Electrical characteristics shall be satisfied.