Precision Quartz Crystal Resonator KYX KUS552962020 552960 Megahertz Frequency Oscillator Component

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification document details the 49US/5.52960MHZ Quartz Crystal Resonator manufactured by Shenzhen Kaiyuexiang Electronics Co., Ltd. It is designed for applications requiring precise frequency oscillation.

Product Attributes

Brand: Kaiyuexiang
Origin: Shenzhen, China
Product Name: Quartz Crystal Resonator
Product Model: 49US/5.52960MHZ
Original Model: KUS552962020

Technical Specifications

Parameter	Value	Unit	Notes
Normal Frequency	5.52960	MHz
Frequency Tolerance (252)	20	ppm
Temperature Stability	20	ppm
Operating Temperature Range	-20 to +70
Load Capacitance	20	PF
Motional Capacitance	5	PF	MAX
Shunt Capacitance
Effective Series Resistance	250		MAX
Insulation Resistance	500	M OHMS	MIN AT DC 100V
Holder Type	49US AT CUT
Mode of Vibration	FUND
Oscillation Mode	S&A KH-1240
Storage Temperature	-40 to +85
Driver Level	100	W
Solderability	95% Coverage by using 90/10 Sold at 245 for 5 Sec. Dipping after immersion in ALPHA 611 Flux for 5 Sec.
Shock Test	Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board.
Vibration Test	Electrical characteristics shall be satisfied after supplying following Vibration: Frequency 1055Hz, Period 12min, Full Amplitude 1.5mm P-P, Direction X.Y.Z, Time 2hours/each direction.
Strength of Terminals/Lead-Wires (Pulling)	Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages.
Strength of Terminals/Lead-Wires (Bending)	Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. Then straightened gradually. Same bending and straightening to the opposite direction. No visual damages.
Sealing Tightness	No observation of gas bubble after specimen put in hot water at +90+95 for 5 min.
Soldering Dip	Terminals/lead-wires shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped.
Solder Heating	Terminals/lead-wires shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied. Dipping depth 2mm from edge of terminals/lead-wires.
Humidity Test	Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours.
Storage in Low Temperature	Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours.
Storage in High Temperature	Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours.
Temperature Cycle	Electrical characteristics shall be satisfied after supplying the following temperature cycle (3 cycles). Temperature shift from low to high, high to low shall be done in 1/min.