Quartz crystal resonator KYX KUS655362030 with AT CUT vibration mode and 6.5536 MHz normal frequency
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The Kaiyuexiang Electronics Co., Ltd. Quartz Crystal Resonator, model 49US/6.5536MHZ, is a high-quality electronic component designed for precise frequency generation. It is suitable for a wide range of electronic applications requiring stable and accurate oscillation.
Product Attributes
- Brand: Kaiyuexiang ()
- Origin: Shenzhen, China
- Product Name: Quartz Crystal Resonator ()
- Manufacturer Part Number: KUS655362030
Technical Specifications
| Parameter | Specification | Unit | Notes |
| General | |||
| Holder Type | 49US | ||
| Mode of Vibration | AT CUT | ||
| Oscillation Mode | FUND S&A | ||
| Test Facilities | KH-1240 | ||
| Storage Temperature | -40 to +85 | ||
| Driver Level | 100 | W | |
| Electrical Parameter | |||
| Normal Frequency | 6.5536 | MHz | |
| Frequency Tolerance (252) | 30 | ppm | |
| Temperature Stability | 20 | ppm | |
| Operating Temperature Range | -20 to +70 | ||
| Load Capacitance | 20 | PF | |
| Motional Capacitance | 5 | PF | MAX |
| Shunt Capacitance | |||
| Effective Series Resistance | 250 | MAX | |
| Insulation Resistance | 500 | M OHMS | MIN AT DC 100V |
| Mechanical Parameter | |||
| Solderability | 95% COVERAGE BY USING 90/10 SOLD AT 245FOR 5 SEC. DIPING AFTER IMMERSION IN ALPHA 611 FLUX FOR 5 SEC. | ||
| Mechanical Endurance - Shock | Electrical characteristics shall be satisfied after dropping three times from the height of 50 cm onto Hard wooden board. | ||
| Mechanical Endurance - Vibration | Electrical characteristics shall be satisfied after supplying following Vibration: Frequency 1055Hz, Period 12min, Full Amplitude 1.5mm PP, Direction X.Y.Z, Time 2hours/each direction. | ||
| Strength of Terminals/Lead-Wires - Pulling | Body of specimen shall be fixed, and 900g of tension weight shall be supplied gradually to axial direction of terminals/lead-wires for 30 sec. No visual damages after test. | ||
| Strength of Terminals/Lead-Wires - Bending | Body of specimen shall be fixed, and 90degree bending shall be given, being supplied 225gs tension weight. After that, terminals/lead-wires shall be straightened gradually. Then the same bending and straightening shall be supplied to the opposite direction in the same axial. No visual damages after test. | ||
| Sealing Tightness | No observation of gas bubble after specimen put in hot water at +90+95 for 5 min. | ||
| Soldering Dip | Terminals/lead-wires of specimen shall be dipped into solder melted tank at +2305 for 3sec. Dipping depth shall be 2mm from the bottom of specimens body. Soldering portion shall be covered in over 90% of terminals/lead-wires dipped. (After applying ROSIN flux) | ||
| Solder Heating | Terminals/lead-wires of specimen shall be dipped into solder melted tank at +35010 for 3 sec. Electrical characteristics shall be satisfied after dipping depth shall be 2mm from edge of terminals/lead-wires. | ||
| Environmental Endurance | |||
| Humidity | Electrical characteristics shall be satisfied after letting it alone at 602 in humidity of 9095% for 250 hours. | ||
| Storage in Low Temperature | Electrical characteristics shall be satisfied after letting it alone at -302 for 250 hours. | ||
| Storage in High Temperature | Electrical characteristics shall be satisfied after letting it alone at +852 for 250 hours. | ||
| Temperature Cycle | Electrical characteristics shall be satisfied after supplying the following temperature cycle (3cycles). Temperature shift from low to high, high to low shall be done in 1/min. | ||
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina