Electrolytic capacitor LSTL R00LRS1E102G017M00 with surge voltage rating of 32 volts and long load life
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The LRS series of polar aluminum electrolytic capacitors from Jiang Xi Lian Sheng Electronic CO.,LTD. are designed for electronic equipment applications. These capacitors are compliant with ROHS (2002/95/EC) and meet IEC60384 standards. They offer reliable performance with a long load life of 7000 hours at 105 and are suitable for a wide operating temperature range of -40 to +105.
Product Attributes
- Brand: LSTL (Trademark)
- Manufacturer: Jiang Xi Lian Sheng Electronic CO.,LTD. (4321 Factory)
- Origin: China
- Certifications: ROHS compliant (2002/95/EC), IEC60384
- Sleeve Color: Coffee with gold lettering
Technical Specifications
| LIAN SHENG (P/N) | Series | Rated Voltage (V) | Capacitance (uF) | Capacitance Tolerance (%) | Dissipation Factor Max (%) | Leakage Current (uA) 2min | Case Size (mm) | Category Temperature Range (C) | Load Life (105C) | Ripple Current 105C (mA) | Surge Voltage (SV) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| R00LRS1E102G017M00 | LRS | 25 | 1000 | -20+20 | 12 | 250 | 10*17 | -40+105 | 7000H | 1402 (at 100KHz) | 32 |
| R00LRS1C471F012M00 | LRS | 16 | 470 | -20+20 | 16 | 75.2 | 8*12 | -40+105 | 7000H | 736 (at 100KHz) | 20 |
Electrical Characteristics
| Item | Test Method | Specification |
|---|---|---|
| Capacitance | Measuring frequency: 120Hz 12Hz; Measuring voltage: 0.5Vrms+0.5VDC2.0VDC | See specification of this series |
| Leakage Current | DC leakage current measured after 1-2 minutes application of DC rated working voltage through a 1000 resistor. | I = 0.01 CRUR or 3A (at 20, after 2 minutes application of rated voltage) |
| Temperature Characteristics | Step 1: Measure capacitance and impedance at 202. Step 2: Measure impedance at low temperatures (-253, -403). Step 4: Measure capacitance at thermal balance after 2 hours at 1052. | Low temperature impedance ratio: Less than specified value. Capacitance change: Within 20% of initial measured value. Dissipation Factor: Less than specified value. |
| Surge Test | Rated surge voltage applied for 305 seconds, followed by 50.5 minutes discharge, repeated for 1000 cycles. | Capacitance change: Within 20% of initial specified value. Dissipation factor: Less than 200% of initial specified value. Leakage current: Within specified value. |
Mechanical Characteristics
| Item | Test Method | Specification |
|---|---|---|
| Lead Strength (Tensile) | Capacitor terminals withstand constant tensile force for 10 seconds without damage. | Varies based on lead diameter (d): 0.45mm (0.5kg), 0.5-0.8mm (1.0kg), 0.8-1.25mm (2.0kg) for wire leads. Snap-in terminal: 2.0kg. |
| Lead Strength (Bending) | Axial load applied to leads while rotating capacitor from vertical to horizontal and back. | Varies based on lead diameter (d): 0.45mm (0.25kg), 0.5-0.8mm (0.5kg), 0.8-1.25mm (1.0kg) for wire leads. Snap-in terminal varies by cross-section area. |
| Vibration Resistance | Uniform vibration from 10-55 Hz with 1.5mm amplitude for 1 minute per cycle, in three perpendicular directions for 2 hours each. | Capacitance: Stable. Appearance: No abnormality. Capacitance change: Within 5% of initial measured value. |
| Solderability | Leads dipped in solder bath at 260C 5C for 20.5 seconds. | Solder alloy covers 95% or more of dipped lead surface. |
Reliability
| Item | Test Method | Specification |
|---|---|---|
| Soldering Heat Resistance | Leads immersed in solder bath at 260C 5C for 101 seconds, 1.5mm from case. | No visible damage or electrolyte leakage. Capacitance change: Within 5% of initial measured value. Tan : Less than specified value. Leakage current: Less than specified value. |
| Damp Heat (Steady State) | Subjected to 40C 2C and 90%-95% relative humidity for 2408 hours. | Capacitance change: Within 20% of initial measured value. Tan : Less than specified value. Leakage current: Less than specified value. |
| Load Life | 7000 hours continuous application of DC rated working voltage at 105. Measurements taken after 24 hours at room temperature and 2 minutes application of rated DC voltage. | Judgment standard according to this series requirement. |
| Shelf Life | 1000 hours at 105 without voltage application. Measurements taken after 24 hours at room temperature and 2 minutes application of rated DC voltage. | Measurements shall meet specified limits. |
| Storage at Low Temperature | Stored at -25 3 for 964 hours (no voltage applied), then at standard atmospheric conditions for 16 hours. | Capacitance change: Within 20% of initial measured value. Tan : Less than specified value. Leakage current: Less than specified value. Appearance: No abnormality. |
| Pressure Relief (Explosion Proof) | AC Test: Applied voltage not exceeding 0.7 times rated DC voltage or 250V AC, whichever is lower, at 50/60Hz. DC Test: Specific current applied while applying inverse voltage. | Pressure relief device shall open to prevent explosion or metal splatter. Applicable for diameter 6mm. |
Material Composition
| Part Name | Material | Main Supplier |
|---|---|---|
| Anode Foil (+) | Aluminum | Low Voltage: HongYuan, Haixin; High Voltage: Haixing |
| Cathode Foil (-) | Aluminum | Feile |
| Separator Paper | Wood pulp paper | Kaien |
| Aluminum Case | 99.5% Aluminum | Anqili/Aoxin |
| Sleeve | PET (Polyvinyl chloride) | Yunling |
| Guide Pin | Aluminum + CP wire | Xingsheng |
| Colloidal Particles | Synthetic rubber (IIR) | Lianhuaxin |
| Electrolyte | Glycol + organic acid salt | Haotai |
Guidelines For Using Aluminum Electrolytic Capacitors
- Polarity: DC electrolytic capacitors are polarized. Ensure correct polarity to prevent circuit short-circuit or capacitor damage. Do not use DC electrolytic capacitors for AC applications.
- Bipolar Capacitors: Suitable for pulse and polarity-reversing circuits, not for pure AC or high ripple current circuits.
- Operating Voltage: Do not exceed rated voltage. Recommended working voltage is 70-80% of rated voltage for extended life.
- Ripple Current: Do not allow ripple current to exceed permissible limits to prevent overheating and damage. Generally not more than 80% of rated current.
- Fast Charge/Discharge Circuits: Use specially designed capacitors for circuits with frequent charge/discharge cycles.
- Operating Temperature: Capacitor characteristics vary with temperature. Lower temperatures ensure longer life. Life is generally doubled for every 10 reduction in temperature.
- Operating Frequency: Capacitance decreases and dissipation factor increases with higher frequencies.
- Long-Term Storage: For capacitors stored for a long time, gradually apply rated DC voltage before use to address increased leakage current and reduced withstand voltage.
- Case Insulation: The capacitor case is not insulated from the cathode terminal. Insulation measures are required at the mounting point if case insulation is necessary.
- Terminal Force: Do not apply excessive force to terminals or leads to prevent breakage or internal connection failure.
- Circuit Board Cleaning: Use recommended cleaning solvents (methanol, isopropanol, etc.). Avoid halogenated solvents.
- Soldering: Maintain distance from the insulated sleeve. Recommended solder bath temperature is within 260 for no more than 10 seconds.
- Hole Layout: Ensure printed circuit board hole spacing matches lead spacing to avoid stress on leads.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina