performance conductive polymer aluminum solid capacitors Man Yue Tech ULR107M0JE55RR for electronic

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

X-CON ULR Series Conductive Polymer Aluminum Solid Capacitors

This specification applies to X-CON brand conductive polymer aluminum solid capacitors designed for use in electronic equipment. These capacitors offer reliable performance and are suitable for various electronic applications.

Product Attributes

Brand: X-CON
Category: Conductive Polymer Aluminum Solid Capacitors
Model: ULR
Supplier: SAMXON ELECTRONIC COMPONENTS LIMITED
Issued Date: 2018-05-22
Version: 01

Technical Specifications

Item	Specification	Condition
Rated Voltage (WV)	6.3 V.DC
Surge Voltage (SV)	7.2 V.DC
Nominal Capacitance (Tolerance)	100F (-20% ~ +20%)	Measuring Frequency: 120Hz12Hz; Measuring Voltage: 0.5Vrms; Measuring Temperature: 202
Leakage Current	See Table 3 (equation)	After DC Voltage applied for 2 minutes at rated voltage (through 1k resistor). Remeasure after voltage treatment (rated voltage for 120min at 105) if exceeding table values.
Tangent of Loss Angle (tan)	0.10 (max.)	Working voltage: 6.3V; Measuring Frequency, Voltage, and Temperature as per 4.2
ESR		Measuring frequency: 100kHz to 300kHz; Measuring temperature: 202; Measuring point: 1mm max from sealing resin surface. (Refer to Table 3 for initial limit)
Temperature Characteristic	Z-55 / Z 20 1.25; Z105 / 20 1.25; C/C 20 Within 5% of step 1; tan value of item 4.4	Step 1: Measure at 202. Step 2: -55+3. Step 3: 15 to 35 for 15 min. Step 4: 1052. Step 5: 202.
Load Life Test	Capacitance Change: Within 20% of initial; tan 1.5x initial; ESR 1.5x initial; Leakage current initial value. No notable appearance changes.	105 2 C with rated voltage for 2000 +48/0 hours.
Surge Test	Capacitance Change: Within 20% of initial; tan 1.5x initial; ESR 1.5x initial; Leakage current initial value.	Applied surge voltage through 1k resistor for 305 seconds every 5 minutes, repeated 1000 times. Left under normal humidity for 1-2 hours before measurement.
Damp Heat Test	Capacitance Change: Within 20% of initial; tan 1.5x initial; ESR 1.5x initial; Leakage current initial value. No notable appearance changes.	90~95%RH at 602 for 100048 hours.
Maximum Permissible Ripple Current	See Table 3	Maximum A.C current at 100kHz and maximum operating temperature. Combined DC and peak AC voltage shall not exceed rated voltage.
Rapid Change of Temperature	Capacitance change: Within 10% of initial; tan value of item 4.4; Leakage current value of item 4.3 (after voltage treatment).	5 cycles: -553 (303 min) Room temperature (303 min) 1052 (3 min or less). Applied voltage: without load.
Lead Strength (Pull)	Lead wire diameter (mm) 0.4d 0.5: 5.0 N; 0.5 d 0.8: 10 N (static load for 101 s, axial direction away from body).
Lead Strength (Bending)	Lead wire diameter (mm) 0.4d 0.5: 2.5 N; 0.5 d 0.8: 5 N (applied to one lead, rotate 900 slowly, 2~3 seconds per bend, opposite direction bends).
Resistance to Vibration	Leakage current value of item 4.3; No cutting and slack of lead terminals.	Frequency: 10 to 55 Hz (1 minute interval / 10 55 10Hz); Amplitude: 0.75mm (Total excursion 1.5mm).