aluminum capacitor Man Yue Tech ERD157M2GL3ARR with tinned CP wire lead and electrolyte paper separator
Product Overview
The SAMXON RD Series Aluminum Electrolytic Capacitors are designed for use in electronic equipment, meeting IEC60384 standards. These polar, foil-type capacitors feature a single-ended construction with an aluminum case, sealed with end seal rubber and finished with a vinyl sleeve. They are suitable for applications requiring reliable performance across a wide temperature range and offer robust characteristics including lightning strike withstanding (6KV).
Product Attributes
- Brand: SAMXON
- Series: RD Series
- Construction Type: Single ended, foil type
- Case Material: Aluminum
- Sealing Material: Rubber
- Sleeve Material: PET
- Lead Wire Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
- Separator Material: Electrolyte paper
- Approvals/Standards: IEC60384
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 120 Hz (mA rms) | ESR at 25 120 Hz () | Load lifetime (Hrs) | Dimension (mm) DL | Sleeve F | d |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ERD157M2GL3ARR**R1R | 400 | 150 | -20%~+20% | -40~105 | 0.20 | 1225 | 900 | 0.7 | 10000 | 18X31.5 | PET | 7.5 |
Key Characteristics & Tests
- Rated Voltage (WV): 160, 200, 220, 250, 350, 400, 420, 450 V.DC
- Surge Voltage (SV): 200, 250, 270, 300, 400, 450, 470, 500 V.DC
- Capacitance Measurement: 120Hz12Hz, 0.5Vrms, 202
- Leakage Current: Measured after 2 minutes with a 1k10 protective resistor. Refer to Table 1.
- tan Measurement: 120Hz, 0.5Vrms, 202. Refer to Table 1.
- Terminal Strength: Tensile force (0.5mm and less: 5N, >0.5mm to 0.8mm: 10N), Bending force (0.5mm and less: 2.5N, >0.5mm to 0.8mm: 5N).
- Load Life Test: 105C 2, DC bias voltage + rated ripple current for Table 1, 10000 Hrs.
- Shelf Life Test: 1052, 1000+48/0 hours.
- Surge Test: 1000 cycles of 305s charge and 5 min 30s discharge.
- Vibration Test: 10Hz ~ 55Hz, 1.5mm peak to peak amplitude.
- Solderability Test: 2453, 2mm dipping depth, 252.5mm/s dipping speed, 30.5s dipping time.
- Resistance to Solder Heat Test: 2605 for 101 seconds or 40010 for 3 0 1 seconds.
- Change of Temperature Test: 5 cycles of +20, -25, +105.
- Damp Heat Test: 90~95% RH at 402 for 5008 hours.
- Vent Test: For products with vent (diameter 6.3mm).
- Lightning Strike Withstanding: 6KV.
Application Guidelines
Capacitors are designed for electronic equipment. Designers should consider the effects of operating temperature and frequency on electrical parameters. Avoid misapplication conditions such as reverse voltage, over voltage, and excessive ripple current. Proper handling during insertion, soldering, and cleaning is crucial to prevent damage and ensure performance.
Environment-related Substances
Refer to the latest document of Environment-related Substances standard (WI-HSPM-QA-072) for controlled substances.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.