Durable Man Yue Tech EGF478M1EK25RR single ended aluminum capacitor with PET sleeve and rubber seal
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The SAMXON GF Series is a range of polar Aluminum electrolytic capacitors (foil type) designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with an aluminum case, impregnated with electrolyte, and sealed with end seal rubber, finished with a PET vinyl sleeve. They are suitable for various electronic applications requiring reliable capacitance and voltage ratings.
Product Attributes
- Brand: SAMXON
- Series: GF Series
- Construction Type: Single ended, foil type
- Case Material: Aluminum
- Sleeve Material: PET
- Sealing Material: Rubber
- Separator: Electrolyte paper
- Terminal Material: Aluminum wire
- Lead Line Material: Tinned CP wire (Pb Free)
- Quality Standard: Meets IEC60384
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100kHz (mA rms) | Impedance at 20 100kHz (max) | Load lifetime (Hrs) | Dimension (mm) DL | F (mm) | d (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EGF478M1EK25RR**P | 25 | 4700 | -20%~+20% | -40~105 | 0.14 | 1175 | 2210 | 0.035 | 4000 | 16X25 | 7.5 | 0.8 |
General Characteristics
| Item | Description |
|---|---|
| Standard atmospheric conditions | Ambient temperature: 15C to 35C, Relative humidity: 45% to 85%, Air Pressure: 86kPa to 106kPa. For doubt resolution: Ambient temperature: 20C 2C, Relative humidity: 60% to 70%, Air Pressure: 86kPa to 106kPa. |
| Rated voltage (WV) | Available in 6.3, 10, 16, 25, 35, 50, 63, 80 V.DC |
| Surge voltage (SV) | Corresponding surge voltages available: 8, 13, 20, 32, 44, 63, 79, 100 V.DC |
| Nominal capacitance (Tolerance) | Measured at 120Hz 12Hz, not more than 0.5Vrms, at 202. Shall be within specified capacitance tolerance. |
| Leakage current | Measured after connecting with a protective resistor (1k 10) in series for 2 minutes. Refer to Table 1 for criteria. |
| tan | Measured at 120Hz 12Hz, not more than 0.5Vrms, at 202. Refer to Table 1 for criteria. |
| Terminal strength (Tensile) | For lead wire diameter 0.8mm: 10 N (1.0 kgf) for 101 seconds. |
| Terminal strength (Bending) | For lead wire diameter 0.8mm: 5 N (0.51 kgf) for 90 bend within 2~3 seconds, then back to original position. |
| Temperature characteristic | Tests performed at -40C, 20C, and 105C. Criteria include limits for tan, leakage current, and impedance ratios at low temperatures. |
| Load life test | Tested at 105C 2 with DC bias voltage plus rated ripple current for 4000 Hrs. Criteria include leakage current, capacitance change (25%), tan (150% of specified), and no electrolyte leakage. |
| Shelf life test | Stored at 1052 for 1000+48/0 hours. Criteria include leakage current, capacitance change (25%), tan (150% of specified), and no electrolyte leakage. |
| Surge test | 1000 cycles of charge/discharge with surge voltage. Criteria include leakage current, capacitance change (15%), tan (within specified value), and no electrolyte leakage. |
| Vibration test | 10Hz ~ 55Hz, 1.5mm peak to peak amplitude for 2 hours in 3 directions. Criteria include no intermittent contacts, open/short circuits, damage, or electrolyte leakage. |
| Solderability test | Soldering at 2453 for 30.5s. Criteria: Minimum 95% of immersed surface coated. |
| Resistance to solder heat test | Terminals immersed in solder bath at 2605 for 101 seconds or 40010 for 10.5 seconds. Criteria: leakage current, capacitance change (10%), tan, and no electrolyte leakage. |
| Change of temperature test | Temperature cycles (-40C to +105C). Criteria: leakage current, tan, and no electrolyte leakage. |
| Damp heat test | 5008 hours at 90~95% RH, 402. Criteria: leakage current, capacitance change (20%), tan (120% of specified), and no electrolyte leakage. |
| Vent test | Applies to products with vents ( 6.3). DC current applied based on diameter. Criteria: Vent operates with no dangerous conditions. |
| Maximum permissible ripple current | Maximum AC current at 120Hz and maximum operating temperature. Frequency multipliers provided for different frequencies and capacitance values. |
5. Environment-related Substances to be Controlled
Refers to the latest document of Environment-related Substances standard (WI-HSPM-QA-072). Lists controlled substances including Heavy metals, Chlorinated organic compounds, Brominated organic compounds, etc.
Attachment: Application Guidelines
Provides guidance on circuit design, capacitor handling, mounting, cleaning, and disposal to ensure optimal performance and safety.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina