Single ended foil type Man Yue Tech EKM127M2GL30RRS1P aluminum electrolytic capacitor for performance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The SAMXON KM Series Aluminum Electrolytic Capacitors are designed for general-purpose electronic equipment applications. These polar, foil-type capacitors meet IEC60384 standards and are constructed with an aluminum case, sealed with end seal rubber, and finished with a PET vinyl sleeve. They offer reliable performance across a specified temperature range and are suitable for various electronic circuits requiring stable capacitance and voltage ratings.

Product Attributes

Brand: SAMXON
Series: KM Series
Construction Type: Single Ended, Foil Type
Sleeve Material: PET
Lead Material: Tinned CP wire (Pb Free)
Origin: MAN YUE ELECTRONICS COMPANY LIMITED

Technical Specifications

SAMXON Part No.	WV (Vdc)	Cap. (F)	Cap. tolerance	Temp. range()	tan (120Hz, 20)	Leakage Current (A, 2min)	Max Ripple Current at 105 120Hz (mA rms)	Load lifetime (Hrs)	Dimension (mm) DL	Sleeve DL	F	d	E
EKM127M2GL30RR**P	400	120	-20%~+20%	-25~105	0.24	1480	532	3000	1830	18X30	7.5	0.8	0.8

General Characteristics

Item	Specification
Rated voltage (WV) (V.DC)	200, 220, 250, 400, 420, 450
Surge voltage (SV) (V.DC)	250, 270, 300, 450, 470, 500
Nominal capacitance measurement condition	Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202
Leakage current condition	Connected with 1k10 resistor for 2 minutes
tan measurement condition	As per nominal capacitance measurement
Terminal strength (Tensile force)	10 N (1.0 kgf) for lead wire diameter > 0.5mm to 0.8mm
Terminal strength (Bending force)	5 N (0.51 kgf) for lead wire diameter > 0.5mm to 0.8mm
Load life test condition	105C 2, DC bias + ripple current, 3000 Hrs
Shelf life test condition	1052 for 1000+48/0 hours
Surge test condition	1000 cycles, 30s charge / 5 min 30s discharge
Vibration test condition	10Hz ~ 55Hz, 1.5mm peak to peak amplitude
Solderability test condition	2453C, 2mm dipping depth, 30.5s
Resistance to solder heat condition	2605 for 101s or 40010 for 3+0/-1s
Change of temperature test condition	5 cycles: +20 (3min), -25 (302min), +105 (302min)
Damp heat test condition	402, 90~95% RH for 5008 hours
Vent test condition	DC reverse voltage test (current varies by diameter)
Maximum permissible ripple current frequency multipliers	120Hz: 1.00, 300Hz: 1.25, 1k: 1.40, 10k~: 1.60