Electrolytic capacitor Man Yue Tech ERT337M2CK40CBSMPSR featuring aluminum case and PET vinyl sleeve
Product Overview
The SAMXON RT Series Aluminum Electrolytic Capacitors are single-ended, foil-type capacitors designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with an aluminum case, end seal rubber, and a PET vinyl sleeve. They are suitable for applications requiring reliable performance across a wide temperature range and offer various electrical characteristics including capacitance, voltage rating, and ripple current handling.
Product Attributes
- Brand: SAMXON
- Category: ALUMINUM ELECTROLYTIC CAPACITORS
- Construction: Single ended type, foil type
- Sleeve Material: PET
- Sleeve Color: Sea green with white lettering
- Lead Line Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
- Sealing Material: Rubber
- Anode Foil: Formed aluminum foil
- Cathode Foil: Etched aluminum foil or formed aluminum foil
- Case Material: Aluminum case
- Separator Material: Electrolyte paper
Technical Specifications
Model: RT Series
Specific Model Example: ERT337M2CK40CBSMPSR
| No. | SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100KHz (mA rms) | Load lifetime (Hr) | Dimension (mm) DL | Sleeve |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | ERT337M2CK40CBSMPSR | 160 | 330 | -20%~+20% | -40~105 | 0.15 | 1081 | 2725 | 5000 | 16X40 | PET Sea green with white lettering |
General Characteristics
| Item | Specification |
|---|---|
| Rated voltage (WV) | 160, 200, 220, 250, 350, 400, 420, 450 V.DC |
| Surge voltage (SV) | 200, 250, 270, 300, 400, 450, 470, 500 V.DC |
| Nominal capacitance measurement conditions | Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202 |
| Leakage current measurement conditions | Series resistor (1k10) for 2 minutes |
| tan measurement conditions | See Nominal capacitance measurement conditions |
| Terminal strength (Tensile force) | 0.5mm to 0.8mm: 10 N (1.0 kgf) |
| Terminal strength (Bending force) | 0.5mm to 0.8mm: 5 N (0.51 kgf) |
| Load life test conditions | 105C 2, DC bias voltage + rated ripple current for specified hours |
| Shelf life test conditions | 1052 for 1000+48/0 hours (no voltage applied) |
| Surge test conditions | 1000 cycles of 30s charge / 5 min 30s discharge with surge voltage |
| Vibration test conditions | 10Hz ~ 55Hz, 1.5mm peak to peak amplitude for 2 hours in 3 directions |
| Solderability test conditions | Sn-Cu solder, 2503, 2mm depth, 252.5mm/s, 30.5s |
| Resistance to solder heat test conditions | 2605 for 101s or 40010 for 3+0/-1s (to 1.5~2.0mm from body) |
| Change of temperature test conditions | 5 cycles: +20 (3 min), -40(-25) (302 min), +105 (302 min) |
| Damp heat test conditions | 90~95% RH at 402 for 5008 hours |
| Vent test conditions (for products with vent) | DC test with reversed polarity and specified DC current |
| Maximum permissible ripple current | Maximum AC current at 120Hz and maximum operating temperature. Frequency multipliers and temperature coefficients provided. |
Environment-related Substances
Controlled substances list refers to the latest document of Environment-related Substances standard (WI-HSPM-QA-072). Includes Heavy metals, Chlorinated organic compounds, Brominated organic compounds, and others.
Application Guidelines
1. Circuit Design: Considers effects of operating temperature and frequency on electrical parameters. Avoids reverse voltage, over voltage, excessive ripple current, and pulse current. Details on series/parallel capacitor usage, mounting considerations (double-sided boards, hole positioning, spacing, pressure relief vent clearance), electrical isolation, and capacitor sleeve properties are provided. Safety precautions for worst-case failure modes are emphasized.
2. Capacitor Handling Techniques: Includes considerations before use (finite life, transient recovery voltage, leakage current increase after storage, damage from dropping/denting). Details on insertion (polarity verification, hole spacing, auto insertion equipment stress). Manual and flow soldering guidelines, including temperature and time limits. Post-solder handling, circuit board cleaning procedures (solvent compatibility, drying), and mounting adhesives/coating agents are covered.
3. Precautions for using capacitors: Avoids storage or use in extreme temperatures, direct contact with water/oil, high humidity, toxic gases, ozone/radiation, and excessive vibration/shock. Electrical precautions include avoiding terminal contact and short circuits.
4. Emergency Procedures: Immediate equipment shutdown and power disconnection if pressure relief vent operates. Avoid contact with escaping electrolyte gas. First aid for eye/ingestion/skin contact with electrolyte.
5. Long Term Storage: Reconditioning by applying rated voltage in series with a 1000 resistor for 30 minutes is recommended after one year of storage. Products over eighteen months from date code require confirmation.
6. Capacitor Disposal: Recommended methods include incineration after crushing/puncturing or disposal as solid waste, following local laws. Incineration at high temperatures is advised to prevent toxic gas release.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.