aluminum electrolytic capacitor Man Yue Tech EGF108M1EG16RR suitable for electronic equipment applications
Product Overview
The SAMXON GF Series Aluminum Electrolytic Capacitors are foil-type, polar capacitors designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with an aluminum case, sealed with end seal rubber, and enclosed in a PET vinyl sleeve. They are suitable for applications requiring reliable performance across a wide temperature range (-40C to 105C) and offer various capacitance and voltage ratings.
Product Attributes
- Brand: SAMXON
- Category: ALUMINUM ELECTROLYTIC CAPACITORS
- Series: GF Series
- Construction: Single ended type, foil type
- Sleeve Material: PET
- Lead Line Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
- Sealing Material: Rubber
- Case Material: Aluminum case
- Separator Material: Electrolyte paper
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100kHz (mA rms) | Impedance at 20 100kHz (max) | Load lifetime (Hrs) | Dimension (mm) DL | F (mm) | d (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EGF108M1EG16RR**P | 25 | 1000 | -20%~+20% | -40~105 | 0.14 | 250 | 1210 | 0.060 | 3000 | 10x16 | 5.0 | 0.6 |
General Characteristics
- Standard Atmospheric Conditions: Ambient temperature: 15C to 35C, Relative humidity: 45% to 85%, Air Pressure: 86kPa to 106kPa.
- Measurement Conditions: Ambient temperature: 20C 2C, Relative humidity: 60% to 70%, Air Pressure: 86kPa to 106kPa.
- Rated Voltages (WVdc) and Surge Voltages (SVdc): 6.3V/8V, 10V/13V, 16V/20V, 25V/32V, 35V/44V, 50V/63V, 63V/79V, 100V/125V.
Performance Tests
- Capacitance Measurement: 120Hz 12Hz, 0.5Vrms, 20C 2C.
- Leakage Current: Measured after 2 minutes with a 1k 10 protective resistor in series.
- tan Measurement: Same conditions as capacitance measurement.
- Terminal Strength: Tensile force (0.5mm and less: 5N, >0.5mm to 0.8mm: 10N) and Bending force (0.5mm and less: 2.5N, >0.5mm to 0.8mm: 5N).
- Temperature Characteristics: Tested at various temperatures (-40C, 20C, 105C) with specific time intervals.
- Load Life Test: 105C 2C with DC bias voltage plus rated ripple current for specified duration.
- Shelf Life Test: Stored at 105C 2C for 1000 hours without voltage, followed by application of DC rated voltage.
- Surge Test: 1000 cycles of charge (305s) and discharge (5 min 30s) with applied surge voltage.
- Vibration Test: 10Hz ~ 55Hz frequency range, 1.5mm peak to peak amplitude, for 2 hours in each of 3 directions.
- Solderability Test: Soldering temperature 245C 3C, dipping depth 2mm, dipping speed 252.5mm/s, dipping time 30.5s.
- Resistance to Solder Heat Test: Immersion in solder bath at 260C 5C for 101 seconds or 400C 10C for 3 seconds.
- Change of Temperature Test: 5 cycles of temperature changes between +20C, -40C (-25C), and +105C.
- Damp Heat Test: 5008 hours at 90~95% RH and 40C 2C.
- Vent Test: For products with vents (6.3mm), DC test with reversed polarity and applied current.
- Maximum Permissible Ripple Current: Maximum AC current at 120Hz and maximum operating temperature.
Environment-related Substances
Refer to the latest document of Environment-related Substances standard (WI-HSPM-QA-072) for controlled substances including heavy metals, chlorinated organic compounds, brominated organic compounds, and others.
Application Guidelines
Includes information on circuit design considerations (operating temperature, frequency, reverse voltage, charge/discharge, overvoltage, ripple current), series/parallel capacitor usage, mounting considerations (double-sided PCBs, hole positioning, clearance for vents), electrical isolation, product endurance, and capacitor handling techniques.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.