Aluminum Electrolytic Capacitor Man Yue Tech EGF227M2AI25RR Polar Foil Type for Electronic Equipment
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The SAMXON GF Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. Meeting IEC60384 standards, these capacitors are constructed with a single-ended type, featuring terminals fixed to anode and cathode foil, wound together with paper, impregnated with electrolyte, and enclosed in an aluminum case. They are sealed with end seal rubber and finished with a vinyl sleeve. These capacitors are suitable for general electronic equipment applications.
Product Attributes
- Brand: SAMXON
- Series: GF Series
- Construction Type: Single Ended
- Sleeve Material: PET
- Sealing Material: Rubber
- Lead Line Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100kHz (mA rms) | Impedance at 20 100kHz (max) | Load lifetime (Hrs) | Dimension (mm) DL | F | d |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EGF227M2AI25RR**P | 100 | 220 | -20%~+20% | -40~105 | 0.08 | 220 | 922 | 0.096 | 4000 | 12.5X25 | 5.0 | 0.6 |
Other Specifications
| Item | Specification |
|---|---|
| Rated voltage (WV) | 6.3, 10, 16, 25, 35, 50, 63, 100 V.DC |
| Surge voltage (SV) | 8, 13, 20, 32, 44, 63, 79, 125 V.DC |
| Nominal Capacitance Measurement Conditions | Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202 |
| Terminal Strength (Tensile) | 0.5mm and less: 5 N (0.51 kgf), Over 0.5mm to 0.8mm: 10 N (1.0 kgf) |
| Terminal Strength (Bending) | 0.5mm and less: 2.5 N (0.25 kgf), Over 0.5mm to 0.8mm: 5 N (0.51 kgf) |
| Load Life Test Conditions | 105C 2, DC bias voltage + rated ripple current for Table 1, 16 hours recovering time |
| Shelf Life Test Conditions | 1052, no voltage applied for 1000+48/0 hours, followed by 4-8 hours stabilization at room temperature, then DC rated voltage applied for 30min through a 1k100 resistor. |
| Surge Test Cycles | 1000 cycles (305s charge, 5 min 30s discharge) |
| Vibration Test Conditions | 10Hz ~ 55Hz, 1.5mm peak to peak amplitude, 2 hours in each of 3 mutually perpendicular directions |
| Solderability Test Conditions | Soldering temperature: 2453C, Dipping depth: 2mm, Dipping speed: 252.5mm/s, Dipping time: 30.5s |
| Resistance to Solder Heat Conditions | 2605 for 10 1 seconds OR 40010 for 1+0/-1 seconds, 1.5~2.0mm from the body |
| Change of Temperature Test Cycles | 5 cycles: (1)+20 3 min, (2)-40 (-25) 302 min, (3)+105 302 min |
| Damp Heat Test Conditions | 90~95% RH at 402 for 5008 hours |
| Vent Test (for 6.3 with vent) | DC Current: 1A (for 22.4mm diameter), 10A (for >22.4mm diameter) |
| Maximum Permissible Ripple Current Frequency Multipliers | 120~180Hz: 0.40-1.00, 1k Hz: 0.75-1.00, 10k Hz: 0.90-0.95, 100k Hz: 1.00 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina