single ended aluminum electrolytic capacitor Man Yue Tech EKM336M2GG18TC71AGX 400V 33F with PET sleeve
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The SAMXON KM Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. They meet IEC60384 standards and are constructed with a single-ended design, featuring an aluminum case, a vinyl sleeve, and impregnated electrolyte. These capacitors are suitable for general electronic applications requiring reliable performance.
Product Attributes
- Brand: SAMXON
- Series: KM Series
- Construction Type: Single ended, foil type
- Sleeve Material: PET
- Standards Compliance: IEC60384
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 120Hz (mA rms) | ESR at 25 100kHz () | Load lifetime (Hrs) | Dimension (mm) DL | F | d | Sleeve |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EKM336M2GG18TC71AGX | 400 | 33 | -20%~+20% | -25~105 | 0.20 | 436 | 147 | 3 | 2000 | 10X18 | 5.0 | 0.6 | PET |
General Characteristics
| Item | Performance |
|---|---|
| Rated voltage (WV) | 6.3, 10, 16, 25, 35, 50, 63, 100, 160, 200, 220, 250, 350, 400, 420, 450 V.DC |
| Surge voltage (SV) | 8, 13, 20, 32, 44, 63, 79, 125, 200, 250, 270, 300, 400, 450, 470, 500 V.DC |
| Nominal capacitance (Tolerance) | Measured at 120Hz12Hz, 0.5Vrms, 202. Shall be within specified tolerance. |
| Leakage current | Measured after 2 minutes with a 1k10 resistor in series. Refer to Table 1. |
| tan | Measured at 120Hz12Hz, 0.5Vrms, 202. Refer to Table 1. |
| Terminal strength | Tensile force: 5N (0.51kgf) for 0.5mm wire, 10N (1.0kgf) for >0.5mm to 0.8mm wire. Bending force: 2.5N (0.25kgf) for 0.5mm wire, 5N (0.51kgf) for >0.5mm to 0.8mm wire. No breakage or looseness. |
| Load life test | 105C 2, DC bias + ripple current for Table 1 hours. Criteria: Leakage current as per 4.3, Capacitance change 20%, tan 200% of specified, no electrolyte leakage. |
| Shelf life test | 1052 for 1000+48/0 hours. Criteria: Leakage current as per 4.3, Capacitance change 20%, tan 200% of specified, no electrolyte leakage. |
| Surge test | 1000 cycles of 30s charge and 5min 30s discharge at 15~35. Criteria: Leakage current as specified, Capacitance change 15%, tan as specified, no electrolyte leakage. |
| Vibration test | 10Hz ~ 55Hz, 1.5mm peak to peak amplitude for 2 hours in 3 directions. Criteria: No intermittent contacts, open/short circuit, damage, or electrolyte leakage. Markings legible. |
| Solderability test | 2503, 2mm depth, 252.5mm/s, 30.5s. Criteria: Min 95% surface coated. |
| Resistance to solder heat test | 2605 for 101s or 40010 for 3+0/-1s to 1.5~2.0mm from body. Criteria: Leakage current as specified, Capacitance change 10%, tan as specified, no electrolyte leakage. |
| Change of temperature test | 5 cycles of 20, rated low temp (-40/-25) 302 min, rated high temp (+105) 302 min. Criteria: Leakage current as specified, tan as specified, no electrolyte leakage. |
| Damp heat test | 90~95% RH at 402 for 5008 hours. Criteria: Leakage current as specified, Capacitance change 20%, tan 120% of specified, no electrolyte leakage. |
| Vent test | Applies to products with vent (diameter 6.3mm). DC test with reversed polarity. Criteria: Vent operates with no dangerous conditions. |
| Maximum permissible ripple current | Maximum AC current at 120Hz and maximum operating temperature. Refer to Table 1 and frequency multipliers. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina