aluminum electrolytic capacitor Man Yue Tech EGT107M1EE11RRS0P-R with tinned CP wire leads and vinyl sleeve
SAMXON GT SERIES ALUMINUM ELECTROLYTIC CAPACITORS
Product Overview
This specification applies to polar aluminum electrolytic capacitors (foil type) designed for use in electronic equipment. The GT Series capacitors are manufactured to meet IEC60384 standards, offering reliable performance for various electronic applications. They are constructed with a single-ended type, featuring tinned CP wire leads, aluminum wire terminals, and an aluminum case impregnated with electrolyte. The capacitors are sealed with end seal rubber and finished with a vinyl sleeve. Key characteristics include a wide operating temperature range (-40C to 105C), defined capacitance tolerances, leakage current, Tan, impedance, and terminal strength, along with comprehensive performance tests like load life, shelf life, surge, vibration, and damp heat tests.
Product Attributes
- Brand: SAMXON
- Series: GT SERIES
- Type: Polar aluminum electrolytic capacitor (foil type)
- Construction: Single ended
- Sleeve Material: PVC/PET
- Compliance: Meets IEC60384 standards
Technical Specifications
Part Number System: E GT [Capacitance Code] [Voltage Code] [Type Code] [Diameter Code] [Length Code] [Sleeve Material Code]
Capacitance Code:
474 (0.47F), 475 (4.7F), 476 (47F), 477 (470F), 478 (4700F), 479 (47000F)
Rated Voltage Code:
0J (6.3V), 1A (10V), 1C (16V), 1E (25V), 1V (35V), 1H (50V), 1J (63V), 2A (100V)
Type Code:
RR (Bulk), TU (Taping), TV (Taping), TC (Forming), TE (Taping), CE (Forming), HE (Forming), KD (Forming), FD (Forming)
Capacitance Tolerance:
M (-20% ~ +20%)
Diameter Code:
E (6.3mm), F (8mm), G (10mm), I (12.5mm), K (16mm), L (18mm)
Length Code:
e.g., "11" (11mm), "1B" (12.5mm), "25" (25mm), "35" (35mm)
Sleeve Material Code:
P (PET), Blank (PVC)
Construction Materials:
| Component | Material |
|---|---|
| Lead Line | Tinned CP wire (Pb Free) |
| Terminal | Aluminum wire |
| Rubber seal | Rubber |
| Al-Foil (+) | Formed aluminum foil |
| Al-Foil (-) | Etched aluminum foil or formed aluminum foil |
| Case | Aluminum case |
| Sleeve | PVC/PET |
| Separator | Electrolyte paper |
General Characteristics:
| Item | Specification |
|---|---|
| Operating Temperature Range | -40C to 105C |
| Rated Voltage (WV) | 6.3V to 100V DC |
| Surge Voltage (SV) | 8V to 125V DC (varies by rated voltage) |
| Capacitance Tolerance | 20% (M) |
| Leakage Current | 0.01CV or 3A (whichever is greater) |
| Tan (max.) | 0.08 to 0.22 (varies by rated voltage and capacitance) |
| Impedance | Less than initial limit at 100kHz, 20C |
| Terminal Strength (Tensile) | 5N (0.51kgf) for 0.5mm wire; 10N (1.0kgf) for >0.5mm to 0.8mm wire |
| Terminal Strength (Bending) | 2.5N (0.25kgf) for 0.5mm wire; 5N (0.51kgf) for >0.5mm to 0.8mm wire |
Performance Tests:
| Test | Condition | Criteria |
|---|---|---|
| Load Life Test | 105C, DC bias + ripple current | Capacitance change 25%, Tan 200% of specified value, no electrolyte leakage |
| Shelf Life Test | 105C, 1000 hours (no voltage) | Capacitance change 25%, Tan 200% of specified value, no electrolyte leakage |
| Surge Test | 1000 cycles of charge/discharge | Capacitance change 15%, tan specified value, no electrolyte leakage |
| Vibration Test | 10Hz ~ 55Hz, 1.5mm amplitude | No intermittent contacts, no damage, no leakage |
| Solderability Test | 2453C, 30.5s | 95% surface coverage |
| Resistance to Solder Heat Test | 2605C for 101s or 40010C for 3+0-1s | Capacitance change 10%, tan specified value, no electrolyte leakage |
| Change of Temperature Test | 5 cycles: +20C, -40C/-25C, +105C | No electrolyte leakage, tan specified value |
| Damp Heat Test | 402C, 90~95% RH for 5008 hours | Capacitance change 20%, Tan 120% of specified value, no electrolyte leakage |
| Vent Test (for products with vent) | DC test with reversed polarity | Vent operates without dangerous conditions |
Product Dimensions & Ripple Current:
Refer to pages 13-17 for detailed tables including dimensions (D x L), Impedance (), and Maximum Permissible Ripple Current (mA rms) at 105C and 100kHz for various voltage codes and capacitance values.
Taping Dimensions:
Refer to pages 19-21 for taping specifications (TU, TV, TC, TE types) including dimensions like carrier tape width (W), component spacing (P), and lead diameter (d).
Environment-related Substances:
Compliant with the latest version of
Application Guidelines:
Includes recommendations on circuit design, operating temperature and frequency effects, avoiding common misapplication conditions (reverse voltage, over voltage, ripple current), series/parallel capacitor usage, and capacitor mounting considerations. Also covers handling techniques, soldering, cleaning, and disposal.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.