single ended aluminum electrolytic capacitor Man Yue Tech EGT475M1HD11CBS0P for electronic devices
SAMXON GT Series Aluminum Electrolytic Capacitors
Product Overview
The SAMXON GT Series Aluminum Electrolytic Capacitors are foil-type, polar capacitors designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with an aluminum case, PET sleeve, and impregnated electrolyte. They are suitable for general electronic equipment applications where reliable performance and adherence to international standards are required.
Product Attributes
- Brand: SAMXON
- Category: ALUMINUM ELECTROLYTIC CAPACITORS
- Construction Type: Single ended type
- Sleeve Material: PET
- Lead Line Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
- Rubber Seal Material: Rubber
- Al-Foil (+) Material: Formed aluminum foil
- Al-Foil (-) Material: Etched aluminum foil or formed aluminum foil
- Case Material: Aluminum case
- Separator Material: Electrolyte paper
Technical Specifications
| No. | SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range () | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100kHz (mA rms) | Impedance at 20 100kHz (max) | Load lifetime (Hrs) | Dimension (mm) DL | F 0.5 | d 0.05 | D + -0.5 | L + -1.0 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | EGT475M1HD11RR**P | 50 | 4.7 | -20%~+20% | -40~105 | 0.10 | 3 | 88 | 1.900 | 5000 | 5X11 | 2.0 | 0.5 | 1.0 | 1.5 |
General Characteristics
- Standard Atmospheric Conditions: Ambient temperature: 15C to 35C, Relative humidity: 45% to 85%, Air Pressure: 86kPa to 106kPa.
- Measurement Conditions: Ambient temperature: 20C 2C, Relative humidity: 60% to 70%, Air Pressure: 86kPa to 106kPa.
- Operating Temperature Range: See Table 1 temperature range (-40~105).
Performance Characteristics
- Rated Voltage (WV): 6.3, 10, 16, 25, 35, 50, 63, 100 V.DC
- Surge Voltage (SV): 8, 13, 20, 32, 44, 63, 79, 125 V.DC
- Nominal Capacitance Measurement: 120Hz12Hz, 0.5Vrms, 202.
- Leakage Current Measurement: Connected with a protective resistor (1k10) in series for 2 minutes.
- Tan Measurement: Measured at 120Hz12Hz, 0.5Vrms, 202.
- Impedance Measurement: 100kHz, 202, measured 2mm max from the surface of the sealing rubber.
- Terminal Strength: Tensile force and bending force specifications provided for different lead wire diameters.
- Temperature Characteristic Test: Includes steps at -40, 20, and 105.
- Load Life Test: 5000+48/0 hours at 105 2 C with DC bias voltage plus rated ripple current.
- Shelf Life Test: 1000+48/0 hours at 1052 with no voltage applied.
- Surge Test: 1000 cycles of charge (30 5s) and discharge (5 min 30s) with a surge voltage.
- Vibration Test: 10Hz ~ 55Hz frequency range, 1.5mm peak to peak amplitude for 2 hours in 3 directions.
- Solderability Test: Soldering temperature 2453C, dipping time 30.5s.
- Resistance to Solder Heat Test: Immersion into solder bath at 2605 for 101 seconds or 40010 for 3 + 0 1 seconds.
- Change of Temperature Test: 5 cycles of temperature changes including -40, 20, and 105.
- Damp Heat Test: 500 8 hours in 90~95% RH at 402.
- Vent Test: For products with vent (diameter 6.3), DC test with reversed polarity.
- Maximum Permissible Ripple Current: Specified at 100kHz and maximum operating temperature. Frequency multipliers provided.
Environment-related Substances
Refers to the latest document of Environment-related Substances standard (WI-HSPM-QA-072). Lists controlled substances including heavy metals, chlorinated organic compounds, brominated organic compounds, and others.
Application Guidelines
Includes guidance on circuit design (operating temperature, frequency effects, common application conditions to avoid like reverse voltage, over voltage, ripple current), using multiple capacitors in series or parallel, and capacitor mounting considerations (circuit board design, clearance for vents, wiring near vents).
Capacitor Handling Techniques
Provides instructions on considerations before using capacitors (finite life, transient recovery voltage, leakage current increase with storage, avoiding dropped or dented capacitors), insertion procedures (verifying capacitance, voltage, polarity, hole spacing), manual and flow soldering guidelines, and post-soldering handling.
Circuit Board Cleaning
Details acceptable cleaning methods, solvents, drying procedures, and monitoring contamination levels. Specific solvent groups to avoid are listed.
Precautions for Using Capacitors
Covers environmental conditions to avoid (temperature extremes, water, high humidity, toxic gases, radiation, vibration/shock) and electrical precautions (avoiding terminal contact, short circuits).
Emergency Procedures
Outlines steps to take if the pressure relief vent operates, including turning off equipment, avoiding contact with escaping electrolyte, and first aid for eye/ingestion/skin contact.
Long Term Storage
Explains that leakage current increases with long storage times and recommends reconditioning by applying rated voltage in series with a current limiting resistor.
Capacitor Disposal
Suggests incineration after crushing or puncturing, or disposal as solid waste, noting that local laws may have specific requirements.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.