foil type electrolytic capacitor Man Yue Tech ERT475M2WF12RR with vinyl sleeve and tinned CP lead wire

Product Overview

SAMXON RT Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with a single-ended design, featuring an aluminum case impregnated with electrolyte and sealed with end seal rubber, finished with a vinyl sleeve. They are suitable for applications requiring reliable performance across a wide temperature range.

Product Attributes

• Brand: SAMXON
• Series: RT Series
• Construction Type: Single ended, foil type
• Case Material: Aluminum
• Sleeve Material: PET
• Sealing Material: Rubber
• Lead Wire Material: Tinned CP wire (Pb Free)
• Terminal Material: Aluminum wire
• Separator Material: Electrolyte paper
• Standards Compliance: IEC60384

Technical Specifications

General Characteristics:

• Standard Atmospheric Conditions: Ambient temperature: 15C to 35C, Relative humidity: 45% to 85%, Air Pressure: 86kPa to 106kPa. For doubtful results: Ambient temperature: 20C 2C, Relative humidity: 60% to 70%, Air Pressure: 86kPa to 106kPa.
• Operating Temperature Range: Ambient temperature range at which the capacitor can be operated continuously at rated voltage (Refer to Table 1).
• Rated Voltages (WV) & Surge Voltages (SV): 160V/200V, 200V/250V, 220V/270V, 250V/300V, 350V/400V, 400V/450V, 420V/470V, 450V/500V.
• Nominal Capacitance Measurement: 120Hz12Hz, not more than 0.5Vrms, 202.
• Terminal Strength: Tensile force: 5N (0.51kgf) for 0.5mm wire, 10N (1.0kgf) for >0.5mm to 0.8mm wire. Bending force: 2.5N (0.25kgf) for 0.5mm wire, 5N (0.51kgf) for >0.5mm to 0.8mm wire.
• Load Life Test: 105C 2, DC bias voltage plus rated ripple current for Table 1. Tested after 16 hours recovery. Criteria: Leakage current satisfied, Capacitance Change within 20%, tan not more than 200% of specified value, no electrolyte leakage.
• Shelf Life Test: 1052 for 1000+48/0 hours. Criteria: Leakage current satisfied, Capacitance Change within 20%, tan not more than 200% of specified value, no electrolyte leakage.
• Surge Test: 1000 cycles of charge (305s) and discharge (5 min 30s) with surge voltage. Criteria: Leakage current not more than specified, Capacitance Change within 15%, tan not more than specified, no electrolyte leakage.
• Vibration Test: 10Hz ~ 55Hz, 1.5mm peak to peak amplitude for 2 hours in 3 directions. Criteria: No intermittent contacts, open/short circuit, damage to terminals/electrodes, mechanical damage, electrolyte leakage, or swelling. Markings legible.
• Solderability Test: 2453C, 2mm dipping depth, 252.5mm/s, 30.5s. Criteria: Minimum 95% of immersed surface coated.
• Resistance to Solder Heat Test: 2605 for 101s or 40010 for 3 + 0 1 s to 1.5~2.0mm from body. Criteria: Leakage current not more than specified, Capacitance Change within 10%, tan not more than specified, no electrolyte leakage.
• Change of Temperature Test: 5 cycles of temperature changes (-40/-25, +105). Criteria: Leakage current not more than specified, tan not more than specified, no electrolyte leakage.
• Damp Heat Test: 90~95% RH at 402 for 5008 hours. Criteria: Leakage current not more than specified, Capacitance Change within 20%, tan not more than 120% of specified value, no electrolyte leakage.
• Vent Test: For products with vent (diameter 6.3). DC test with reversed polarity. Criteria: Vent operates with no dangerous conditions.
• Maximum Permissible Ripple Current: Maximum AC current at 120Hz and maximum operating temperature. Frequency multipliers provided for different frequencies.

Environment-related Substances: Controlled substances list includes heavy metals, chlorinated organic compounds, brominated organic compounds, etc. (Refer to WI-HSPM-QA-072).

Attachment: Application Guidelines cover circuit design considerations (operating temperature, frequency, life expectancy, reverse voltage, charge/discharge, over voltage, ripple current, series/parallel connection), capacitor handling techniques (insertion, soldering, cleaning), precautions for use (environmental, electrical), emergency procedures, long-term storage, and disposal.