Durable aluminum case capacitor Man Yue Tech ERT336M2GG25RR designed for general electronic equipment

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The SAMXON RT Series is a line of polar aluminum electrolytic capacitors (foil type) designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with an aluminum case, end seal rubber, and a vinyl sleeve. They are suitable for general electronic equipment applications and are built for reliability and performance.

Product Attributes

Brand: SAMXON
Series: RT Series
Construction Type: Single ended
Sleeve Material: PET
Sealing Material: Rubber
Lead Line Material: Tinned CP wire (Pb Free)
Terminal Material: Aluminum wire
Anode Foil: Formed aluminum foil
Cathode Foil: Etched aluminum foil or formed aluminum foil
Separator Material: Electrolyte paper
Case Material: Aluminum case

Technical Specifications

SAMXON Part No.	WV (Vdc)	Cap. (F)	Cap. tolerance	Temp. range()	tan (120Hz, 20)	Leakage Current (A, 2min)	Max Ripple Current at 105 100KHz (mA rms)	Load lifetime (Hrs)	Dimension (mm) DL	d	F
ERT336M2GG25RR**R1R	400	33	-20%~+20%	-40~105	0.20	289	761	5000	10X25	5.0	0.6

Additional Technical Data:

Item	Description
Rated voltage (WV)	WV (V.DC): 160, 200, 220, 250, 350, 400, 420, 450
Surge voltage (SV)	SV (V.DC): 200, 250, 270, 300, 400, 450, 470, 500
Nominal capacitance measurement	Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202
Leakage current condition	Connected with 1k10 resistor for 2 minutes.
Terminal strength (Tensile)	0.5mm and less: 5 N (0.51 kgf); Over 0.5mm to 0.8mm: 10 N (1.0 kgf)
Terminal strength (Bending)	0.5mm and less: 2.5 N (0.25 kgf); Over 0.5mm to 0.8mm: 5 N (0.51 kgf)
Load life test conditions	105C 2, DC bias voltage + rated ripple current for specified hours.
Shelf life test conditions	1052 for 1000+48/0 hours, followed by DC rated voltage applied for 30min.
Surge test cycles	1000 cycles (charge 305s, discharge 5 min 30s).
Vibration test frequency	10Hz ~ 55Hz, Peak to peak amplitude: 1.5mm.
Solderability test temperature	2503 (Sn-Cu solder).
Resistance to solder heat temperature	2605 for 101 seconds or 40010 for 3+0/-1 seconds.
Change of temperature test cycles	5 cycles (20, Rated low temp, Rated high temp).
Damp heat test conditions	90~95% RH at 402 for 5008 hours.
Vent test DC current	Diameter 22.4mm or less: 1A; Over 22.4mm: 10A.
Maximum permissible ripple current frequency multipliers	120Hz: 1.00, 1kHz: 0.80, 10kHz: 0.40, 100kHz: 0.20 (example for 1~5.6F range)