Polar Aluminum Electrolytic Capacitor Man Yue Tech ESK477M1CF12CB Aluminum Case Single Ended Model

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to polar Aluminum electrolytic capacitors (foil type) manufactured by SAMXON, designed for use in electronic equipment. These capacitors are constructed with a single-ended type, featuring terminals fixed to anode and cathode foil, wound together with paper, and impregnated with electrolyte. The wound element is enclosed in an aluminum case, sealed with end seal rubber, and finished with a vinyl sleeve. The product quality meets IEC60384 standards.

Product Attributes

Brand: SAMXON
Manufacturer: MAN YUE ELECTRONICS COMPANY LIMITED
Series: SK Series
Construction Type: Single ended, foil type
Sleeve Material: PET
Lead Line Material: Tinned CP wire (Pb Free)
Terminal Material: Aluminum wire
Sealing Material: Rubber
Anode Foil Material: Formed aluminum foil
Cathode Foil Material: Etched aluminum foil or formed aluminum foil
Case Material: Aluminum case
Separator Material: Electrolyte paper

Technical Specifications

SAMXON Part No.	WV (Vdc)	Cap. (F)	Cap. tolerance	Temp. range()	tan (120Hz, 20)	Leakage Current (A, 2min)	Max Ripple Current at 105 100KHz (mA rms)	Impedance at 20 100kHz (max)	Load lifetime (Hrs)	Dimension (mm) DL	F (mm)	d (mm)
1 ESK477M1CF12CB**P-R	16	470	-20%~+20%	-40~105	0.16	75	1200	0.075	9000	8X12	3.5	0.5

General Characteristics

Item	Description
Rated voltage (WV)	6.3, 10, 16, 25, 35, 50, 63, 100 V.DC
Surge voltage (SV)	8, 13, 20, 32, 44, 63, 79, 125 V.DC (corresponding to WV)
Nominal capacitance (Tolerance)	Measured at 120Hz12Hz, 0.5Vrms, 202. Shall be within specified tolerance.
Leakage current	Measured after connecting with a 1k 10 resistor for 2 minutes. Refer to Table 1.
tan	Measured at 120Hz12Hz, 0.5Vrms, 202. Refer to Table 1.
Terminal strength (Tensile)	0.5mm and less: 5 N (0.51 kgf); Over 0.5mm to 0.8mm: 10 N (1.0 kgf)
Terminal strength (Bending)	0.5mm and less: 2.5 N (0.25 kgf); Over 0.5mm to 0.8mm: 5 N (0.51 kgf)
Temperature characteristic (-25)	Z-25/Z+20 ratio: 2 for WV 6.3V to 50V. Capacitance, tan, impedance measured at 120Hz.
Load life test	105C 2, DC bias voltage + rated ripple current. After 16 hours recovery. Criteria: Leakage current as per 4.3, Capacitance Change within 25% (30% for 6.3,10V), tan 200% of specified value. No electrolyte leakage.
Shelf life test	105 2 for 1000+48/0 hours. After 4~8 hours stabilization, DC rated voltage applied for 30min via 1k100 resistor. Criteria: Leakage current as per 4.3, Capacitance Change within 25% (30% for 6.3,10V), tan 200% of specified value. No electrolyte leakage.
Surge test	1000 cycles of 30s charge / 5min 30s discharge with surge voltage. Criteria: Leakage current not more than specified, Capacitance Change within 15%, tan not more than specified. No electrolyte leakage.
Vibration test	10Hz ~ 55Hz, 1.5mm amplitude, 2 hours per direction. Criteria: No intermittent contacts, open/short circuit, damage to terminals/electrodes, mechanical damage, electrolyte leakage, swelling. Markings legible.
Solderability test	2453, 2mm depth, 252.5mm/s, 30.5s. Criteria: 95% surface coated.
Resistance to solder heat test	2605 for 101s or 40010 for 3+0/-1s (1.5~2.0mm from body). Criteria: Leakage current not more than specified, Capacitance Change within 10%, tan not more than specified. No electrolyte leakage.
Change of temperature test	5 cycles of +20, -40(-25) for 302min, +105 for 302min. Criteria: Leakage current not more than specified, tan not more than specified. No electrolyte leakage.
Damp heat test	90~95% RH at 402 for 5008 hours. Criteria: Leakage current not more than specified, Capacitance Change within 20%, tan 120% of specified value. No electrolyte leakage.
Vent test	Applies to products with vent (diameter 6.3). DC test with reversed polarity. Criteria: Vent operates with no dangerous conditions.
Maximum permissible (ripple current)	Maximum AC current at 120Hz and maximum operating temperature. Frequency multipliers provided for different frequencies.