performance Man Yue Tech EEP187M2WO30SZ4HP aluminum electrolytic capacitor for electronic equipment

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The SAMXON EP Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. Meeting IEC60384 standards, these capacitors are constructed with an aluminum case, PET sleeve, and solder-coated copper clad steel terminals. They are impregnated with electrolyte and sealed with end seal rubber. The EP series offers reliable performance across a wide temperature range and is suitable for various electronic applications.

Product Attributes

Brand: SAMXON
Series: EP Series
Construction Type: Single ended
Sleeve Material: PET
Terminal Material: Solder coated copper clad steel
Seal Material: Rubber-laminated bakelite
Conforms to: IEC60384

Technical Specifications

SAMXON Part No.	WV (Vdc)	Cap. (F)	Cap. tolerance	Temp. range()	tan (120Hz, 20)	Leakage Current (A, 5min)	Max Ripple Current at 105 120Hz (A rms)	Load lifetime (Hrs)	Dimension (mm) DL	F (mm)
EEP187M2WO30SZ4*P	450	180	-20%~+20%	-40~105	0.25	854	0.91	5000	25x30	101.0

General Characteristics

Item	Specification
Rated voltage (WV)	10, 16, 25, 35, 50, 63, 80, 100, 160, 180, 200, 220, 250, 315, 350, 400, 420, 450, 500 V.DC
Surge voltage (SV)	13, 20, 32, 44, 63, 79, 100, 125, 200, 225, 250, 270, 300, 365, 400, 450, 470, 500, 550 V.DC
Capacitance Measurement	Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202
Leakage Current Test	Connected with 1k10 resistor in series for 5 minutes.
tan Measurement	Frequency: 120Hz12Hz, Voltage: 0.5Vrms, Temperature: 202
Terminal Strength Test	Static load of 25N (2.5kgf) applied axially for 30s.
Load Life Test	1052, DC bias voltage + rated ripple current for specified hours.
Shelf Life Test	Stored at 1052 for 1000+48/0 hours, then tested after stabilization.
Surge Test	1000 cycles of charge (305s) and discharge (5 min 30s) with surge voltage.
Vibration Test	10Hz ~ 55Hz, 1.5mm peak to peak amplitude for 2 hours in 3 directions.
Solderability Test	Sn-Cu solder, 2503, 2mm dipping depth, 252.5mm/s, 30.5s.
Resistance to Solder Heat Test	2605 for 101s or 40010 for 3+0/-1s, 1.5~2.0mm from body.
Change of Temperature Test	5 cycles of temperature cycling (20, rated low temp, +105).
Damp Heat Test	90~95% RH at 402 for 5008 hours.
Vent Test (for products with vent)	Reverse polarity DC test with specified current based on diameter.
Maximum Permissible Ripple Current	Maximum AC current at 120Hz and maximum operating temperature. Frequency multipliers provided.