circuit capacitor KYET PS103J3F2002 with metallized polypropylene film and epoxy resin encapsulation

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to KYET Metallized Polypropylene Film Capacitors (PPS/PPN/CBB81/CBB28). These capacitors utilize organic films as dielectrics and are designed for reliable operation within specified voltage and current limits. They are suitable for various circuit applications where stable capacitance and good electrical characteristics are required. Please refer to the detailed specifications for operating conditions and performance parameters.

Product Attributes

Brand: (KYET ELECTRONICS CO., LTD)
Origin: (Dongguan City)
Material: Metallized Polypropylene Film
Encapsulation: Epoxy Resin (UL V-0 flame retardant), Plastic Case (UL V-0 flame retardant)
Certifications: UL V-0

Technical Specifications

Item	Description	Specification
Scope	This specification covers KYET Metallized Polypropylene Film Capacitors (PPS/PPN/CBB81/CBB28).
Standard Atmospheric Conditions for Measurements	Ambient Temperature	15 to 35 (20 5 if in doubt)
	Relative Humidity (R.H.)	45% to 75% (60% to 70% if in doubt)
	Air Pressure	86 kpa to 106 kpa
Operating Temperature Range	Continuous operation at rated voltage.	-40 to +100
Construction	Dielectric	Metallized Polypropylene Film
	Metal Spray	Special Solder
	Lead Wire	Tinned Copper-clad Steel Wire
	Epoxy Resin	UL V-0 Flame Retardant
	Plastic Case	UL V-0 Flame Retardant
Marking	Manufacturer's Symbol	" KYET ELECTRONICS CO., LTD"
	Type or Material	"PPS" for "Metallized Polypropylene Film"
	Capacitor Class	"CBB81" for "PPS" class
	Nominal Capacitance	Expressed in 3-digit (EIA) code.
	Tolerance	F(1%), G(2%), I(3%), J(5%), K(10%), M(20%)
	Rated Voltage	63, 100, 125, 250, 275, 310, 350, 380, 400, 450, 630, 800, 1000, 1200, 1250, 1600, 2000, 3000 VDC
	Operating Temperature Range	-40105
	Dissipation Factor (Max)	0.2% (at 1KHz, 25)
	Insulation Resistance	CR0.33F: IR10000M; CR0.33F: IR5000M/F (UR100V)
Electrical Characteristics	Withstand Voltage (Between Terminals)	1.5*Ur (DC) for 60 sec. Shall be no abnormality.
	Withstand Voltage (Between Terminals & Enclosure)	2*Ur+500V for 2 to 5 sec. Min. 3000VDC. Shall be no abnormality.
	Dissipation Factor (DF)	0.001 (0.1%) at 1 KHz. Measuring Frequency: 2%; Measuring Voltage: 1 Vrms.
	Capacitance (CAP)	Within the tolerance specified (at +20 5). Measuring Frequency: 2%; Measuring Voltage: 1 Vrms.
	Insulation Resistance (I.R.)	10,000 Mohm (C0.33uf); 5,000 Mohm*uF/C (C>0.33uf). Test Voltage: 100 VDC. Charge Time: 605 sec.
	Soldering Property	More than 90% of circumferential surface of lead wire shall be covered with new solder. Soldering temperature: +260 5. Immersion duration: 2 0.5 sec.
Mechanical Characteristics	Terminal Strength (Tensile Strength)	Apply 1.0Kg for 10 1 sec. to the terminal in the axial direction. Shall be no abnormality.
Endurance Characteristics	Temperature Cycle	Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. Insulation Resistance: 50% of the limit value of NO.5.4. (5 cycles: 20, -40, 20, +100, 20)
	Dry Heat Resistance	Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. Insulation Resistance: 50% of the limit value of NO.5.4. (Test Temperature: +100 2, Test Duration: 16 1 hrs.)
	Cold Resistance	Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. Insulation Resistance: 50% of the limit value of NO.5.4. (Test Temperature: -40 3, Test Duration: 2 1 hrs.)
	Damp Heat	Appearance: Shall be no remarkable change. Withstand Voltage: Shall satisfy NO.5.1. Capacitance Change Rate: Within 5%. Dissipation Factor: 0.002 (0.2%) max. Insulation Resistance: 50% of the limit value of NO.5.4. (Test Temperature: +40 2, Test Humidity: 90% to 95% R.H., Test Duration: 2 1 hrs.)