Polar Aluminum Electrolytic Capacitor Man Yue Tech ERT106M2GF12RR Suitable for Electronic Equipment Applications

Product Overview

The SAMXON RT Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. These capacitors meet IEC60384 standards and are constructed with tinned CP wire terminals, aluminum foil electrodes, a rubber end seal, and a PET sleeve. They are suitable for applications requiring reliable performance across a wide temperature range and are designed to withstand specific surge voltages. The RT series offers a range of voltage and capacitance ratings, with detailed specifications for electrical characteristics, performance under various conditions, and environmental compliance.

Product Attributes

• Brand: SAMXON
• Series: RT Series
• Type: Polar Aluminum Electrolytic Capacitor (Foil Type)
• Construction: Single ended type, impregnated with electrolyte, enclosed in an aluminum case, sealed with end seal rubber, and finished with a vinyl sleeve.
• Sleeve Material: PET
• Lead Line Material: Tinned CP wire (Pb Free)
• Terminal Material: Aluminum wire
• Sealing Material: Rubber
• Compliance: Meets IEC60384 standards

Technical Specifications

General Characteristics

• Standard Atmospheric Conditions for Measurement: Ambient temperature: 15C to 35C, Relative humidity: 45% to 85%, Air Pressure: 86kPa to 106kPa.
• Specific Measurement Conditions: Ambient temperature: 20C 2C, Relative humidity: 60% to 70%, Air Pressure: 86kPa to 106kPa.
• Rated Voltage (WV) & Surge Voltage (SV) Options: 160V/200V, 200V/250V, 220V/270V, 250V/300V, 350V/400V, 400V/450V, 420V/470V, 450V/500V.
• Capacitance Measurement: Frequency: 120Hz12Hz, Voltage: Not more than 0.5Vrms, Temperature: 202.
• Leakage Current Measurement: Capacitor connected with a protective resistor (1k10) in series for 2 minutes.
• tan Measurement: Frequency: 120Hz12Hz, Voltage: Not more than 0.5Vrms, Temperature: 202.
• Terminal Strength: Tensile force (0.5mm wire): 5 N (0.51 kgf), Bending force (0.5mm wire): 2.5 N (0.25 kgf).
• Temperature Characteristics: Performance at -40C, +20C, and +105C are specified for capacitance, tan, and leakage current.
• Load Life Test: At 105C 2 with DC bias voltage plus rated ripple current for specified duration.
• Shelf Life Test: Stored at 1052 for 1000+48/0 hours without voltage.
• Surge Test: 1000 cycles of charge/discharge with specified surge voltage.
• Vibration Test: 10Hz ~ 55Hz, 1.5mm peak to peak amplitude.
• Solderability Test: Soldering temperature: 2453C, Dipping time: 30.5s.
• Resistance to Solder Heat Test: Solder bath at 2605 for 101 seconds or 40010 for 3 + 0 1 seconds.
• Change of Temperature Test: 5 cycles of temperature changes between +20, -25/-40, and +105.
• Damp Heat Test: 5008 hours in 90~95% RH at 402.
• Vent Test: For products with vent (diameter 6.3), DC test with reversed polarity.
• Maximum Permissible Ripple Current: Specified frequency multipliers for different frequencies (120Hz, 1k, 10k, 100k).

Environment-related Substances

Refer to the latest document of Environment-related Substances standard (WI-HSPM-QA-072) for controlled substances including heavy metals, chlorinated organic compounds, brominated organic compounds, and others.

Application Guidelines

• Circuit Design: Considerations for operating temperature, frequency, common application conditions to avoid (reverse voltage, charge/discharge, over voltage, ripple current), series/parallel capacitor usage, and mounting considerations (double-sided boards, hole positioning, clearance for vents, wiring near vents, circuit board patterns under capacitor, screw terminal mounting).
• Capacitor Handling Techniques: Considerations before use (finite life, transient recovery voltage, leakage current increase with storage, impact damage, dented/crushed capacitors), insertion (polarity verification, hole spacing, auto insertion stress), manual soldering (temperature/time, lead forming stress, reinsertion stress, soldering iron contact), flow soldering (immersion depth, soldering conditions, component contact), other soldering considerations (preheat, resin bonding), handling after solder (movement, using capacitor as handle, shock), circuit board cleaning (solvents, drying, contamination monitoring), mounting adhesives and coating agents.
• Precautions for using capacitors: Environmental conditions (temperature, water contact, humidity, toxic gases, ozone/radiation, vibration/shock) and electrical precautions (terminal contact, short circuit).
• Emergency Procedures: Actions to take if the pressure relief vent operates, and contact with escaping electrolyte/gas.
• Long Term Storage: Reconditioning procedures for capacitors stored for extended periods.
• Capacitor Disposal: Recommended methods including incineration and disposal as solid waste, with a note on local laws.