High durability aluminum capacitor Man Yue Tech EGF228M1AG20RR for electronic equipment applications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The SAMXON GF Series Aluminum Electrolytic Capacitors are polar, foil-type capacitors designed for use in electronic equipment. They meet IEC60384 standards and are constructed with an aluminum case, end seal rubber, and a PET vinyl sleeve. These capacitors are suitable for general electronic applications requiring reliable performance and durability.
Product Attributes
- Brand: SAMXON
- Series: GF Series
- Construction Type: Single ended, foil type
- Sleeve Material: PET
- Lead Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
- Sealing Material: Rubber
- Separator Material: Electrolyte paper
- Standard Compliance: IEC60384
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap. tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 (mA rms) | Impedance at 20 100kHz (max) | Load lifetime (Hrs) | Dimension (mm) DL | Sleeve DL | F | d |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EGF228M1AG20RR**P | 10 | 2200 | -20%~+20% | -40~105 | 0.19 | 220 | 1400 | 0.046 | 3000 | 10X20 | 5.0 | 0.6 | PET |
Performance Characteristics
| Item | Description |
|---|---|
| 4.1 Rated voltage (WV) & Surge voltage (SV) | WV (V.DC): 6.3, 10, 16, 25, 35, 50, 63, 100 SV (V.DC): 8, 13, 20, 32, 44, 63, 79, 125 |
| 4.2 Nominal capacitance (Tolerance) | Measuring Conditions: 120Hz12Hz, 0.5Vrms, 202. Criteria: Within specified tolerance. |
| 4.3 Leakage current | Condition: Connected with 1k10 resistor for 2 min. Criteria: Refer to Table 1. |
| 4.4 tan | Condition: See 4.2. Criteria: Refer to Table 1. |
| 4.5 Terminal strength | Tensile Force: 5N (0.51kgf) for 0.5mm wire, 10N (1.0kgf) for >0.5mm to 0.8mm wire. Bending Force: 2.5N (0.25kgf) for 0.5mm wire, 5N (0.51kgf) for >0.5mm to 0.8mm wire. Criteria: No noticeable changes, breakage, or looseness. |
| 4.6 Temperature characteristics | Tests at -40, 20, 105. Criteria: tan within limits, leakage current 8x specified value at -40, impedance ratio Z(-40)/Z(+20) as per table. |
| 4.7 Load life test | Condition: 105C 2, DC bias + ripple current for Table 1, 2 min recovery. Criteria: Leakage current satisfied, Capacitance 25%, tan 150% of specified, no electrolyte leakage. |
| 4.8 Shelf life test | Condition: 1052 for 1000+48/0 hrs, 4~8 hrs recovery, rated DC voltage with 1k100 resistor for 30 min. Criteria: Leakage current satisfied, Capacitance 25%, tan 150% of specified, no electrolyte leakage. |
| 4.9 Surge test | Condition: 1000 cycles of 30s charge and 5 min 30s discharge with surge voltage. Criteria: Leakage current specified value, Capacitance 15%, tan specified value, no electrolyte leakage. |
| 4.10 Vibration test | Condition: 10Hz ~ 55Hz, 1.5mm amplitude for 2 hrs in 3 directions. Criteria: No intermittent contacts, open/short circuits, damage, leakage, or swelling. Markings legible. |
| 4.11 Solderability test | Condition: 2453, 2mm depth, 252.5mm/s, 30.5s. Criteria: 95% surface coated. |
| 4.12 Resistance to solder heat test | Condition: 2605 for 101s or 40010 for 10.1s, 1.5~2.0mm from body. Criteria: Leakage current specified value, Capacitance 10%, tan specified value, no electrolyte leakage. |
| 4.13 Change of temperature test | Condition: 5 cycles of +20 (3 min), -40/-25 (302 min), +105 (302 min). Criteria: Leakage current specified value, tan specified value, no electrolyte leakage. |
| 4.14 Damp heat test | Condition: 90~95% RH at 402 for 5008 hours. Criteria: Leakage current specified value, Capacitance 20%, tan 120% of specified, no electrolyte leakage. |
| 4.15 Vent test | Condition: DC test with reversed polarity, specific DC current applied based on diameter. Criteria: Vent operates without dangerous conditions. |
| 4.16 Maximum permissible (ripple current) | Maximum AC current at 120Hz and max operating temperature. DC + AC peak voltage rated voltage. Frequency multipliers provided for different frequencies and capacitance values. |
Environment-related Substances
Controlled substances list available, referring to the latest document "Environment-related Substances standard" (WI-HSPM-QA-072). Includes categories like Heavy metals, Chlorinated organic compounds, Brominated organic compounds, etc.
Attachment: Application Guidelines
Provides detailed guidance on circuit design, capacitor handling, mounting, cleaning, and disposal to ensure optimal performance and safety.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina