SAMXON RT Series Aluminum Electrolytic Capacitors

Product Overview
The SAMXON RT Series is a range of polar aluminum electrolytic capacitors designed for reliable performance in electronic equipment. These foil-type capacitors meet IEC60384 standards and are constructed with a single-ended design. They feature an aluminum case, end seal rubber, and a vinyl sleeve for identification. The RT series is suitable for general electronic equipment applications where stable electrical parameters are required.

Product Attributes

• Brand: SAMXON
• Category: Aluminum Electrolytic Capacitors
• Series: RT Series
• Construction Type: Single Ended
• Sleeve Material: PET
• Sealing Material: Rubber
• Case Material: Aluminum

Technical Specifications

General Characteristics

• Rated Voltage (WV): 160, 200, 220, 250, 350, 400, 420, 450 V.DC
• Surge Voltage (SV): 200, 250, 270, 300, 400, 450, 470, 500 V.DC (corresponding to WV)
• Capacitance Measurement: 120Hz12Hz, 0.5Vrms, 202
• Terminal Strength: Tensile force: 5-10 N (0.51-1.0 kgf); Bending force: 2.5-5 N (0.25-0.51 kgf)
• Load Life Test: 105 2, DC bias voltage + rated ripple current, 5000 Hrs
• Shelf Life Test: 105 2, 1000+48/0 Hrs

Application Guidelines

• Circuit Design Considerations: Operating temperature and frequency effects on electrical parameters, reverse voltage, charge/discharge applications, over voltage, ripple current, series/parallel capacitor usage, and mounting considerations.
• Capacitor Handling: Pre-use checks, insertion, soldering (manual and flow), post-solder handling, circuit board cleaning, and use of adhesives/coatings.
• Precautions: Environmental conditions (temperature, humidity, gases, radiation, vibration), electrical precautions (shock hazards, short circuits), emergency procedures, and long-term storage.
• Disposal: Incineration or disposal as solid waste, following local laws.