SAMXON Aluminum Electrolytic Capacitors - 2017-2018 Index

Product Overview
SAMXON offers a comprehensive range of aluminum electrolytic capacitors, including miniature, large can, and V-chip types. These capacitors are designed for various applications, from general-purpose use to high-reliability, high-temperature, and audio-specific requirements. The product line features a wide array of technical specifications, including operating temperature ranges from -55C to +130C, voltage ratings from 4V to 630V, and capacitance values from 0.1F to 1,500,000F. SAMXON capacitors are engineered for diverse electronic circuits, providing stable and reliable performance with a focus on quality assurance and environmental compliance.

Product Attributes

• Brand: SAMXON
• Origin: China (Manufacturing Plants in Dongguan and Wuxi)
• Compliance: RoHS Directive, Halogen Free Compliant

Technical Specifications

Series Overview:

Application Guidelines:

• Ensure operating conditions (temperature, ripple current) are within specified limits.
• Capacitors are polarized; avoid reverse or AC voltage. Use non-polar types for circuits with potential polarity reversal.
• Do not use for rapid/frequent charge/discharge cycles without special design capacitors.
• Avoid excess voltage; ensure peak voltage does not exceed rated voltage. Use balancing resistors for series connections.
• Outer sleeve is not guaranteed as an electrical insulator.
• Avoid exposure to water, brine, oil, toxic gases, ozone, UV, radiation, severe vibration, or physical shock.
• Consider lead spacing for PC board mounting and ensure no circuit patterns are above the safety vent.
• Do not locate circuit patterns beneath the capacitor end seal or place heat-generating components near the capacitor.
• Electrical characteristics may vary with temperature and frequency.
• Discharge capacitors with a 1k resistor before handling after power application.
• Perform voltage treatment for capacitors stored for over 6 months.
• Confirm ratings and polarity before installation.
• Do not drop or reuse dropped capacitors. Avoid deforming capacitors during installation.
• Soldering conditions must be within SAMXON specifications (Pb/Sn and Pb-free types).
• Do not clean with halogenated cleaning agents.
• Store capacitors at 5C to 35C,
• Dispose of capacitors as industrial waste through professional specialists.

Part Number System:

The part number system includes Series, Capacitance, Tolerance, Voltage, Case Size, and Feature codes. For example: EKF336M1CE05RRTCSAP.

Taping Specifications:

Detailed dimensions for taping are provided, including carrier tape width, component spacing, and sprocket hole pitch, crucial for automated component placement.

Packing Specifications:

Packing quantities for both taping and bulk types are specified, indicating inner and outer box quantities based on capacitor dimensions.

Lead Forming Specifications:

Specifications for various lead forming codes (CB, HE, FD, KD, EC, PC) are detailed with dimensions like lead span (F) and lead height (H, H1, H2).