Aluminum electrolytic capacitor Man Yue Tech ERT107M2WL30RR with electrolyte paper separator and sealed case
SAMXON RT Series Aluminum Electrolytic Capacitors
Product Overview
This specification applies to polar Aluminum electrolytic capacitors (foil type) designed for use in electronic equipment. The RT series capacitors are manufactured to meet IEC60384 standards, offering reliable performance for various electronic applications. They are constructed with a single-ended, wound element impregnated with electrolyte, enclosed in an aluminum case and sealed with end seal rubber, then finished with a vinyl sleeve.
Product Attributes
- Brand: SAMXON
- Series: RT
- Construction Type: Polar Aluminum electrolytic capacitor (foil type), single-ended
- Sleeve Material: PET
- Sealing Material: Rubber
- Lead Line Material: Tinned CP wire (Pb Free)
- Terminal Material: Aluminum wire
- Case Material: Aluminum case
- Separator Material: Electrolyte paper
Technical Specifications
| SAMXON Part No. | WV (Vdc) | Cap. (F) | Cap tolerance | Temp. range() | tan (120Hz, 20) | Leakage Current (A, 2min) | Max Ripple Current at 105 100KHz (mA rms) | Load lifetime (Hrs) | Dimension (mm) DL | d | F |
|---|---|---|---|---|---|---|---|---|---|---|---|
| ERT107M2WL30RR**R-R | 450 | 100 | -20%~+20% | -25~105 | 0.20 | 925 | 1951 | 5000 | 18X30 | 7.5 | 0.8 |
General Characteristics
- Rated Voltage (WV): 160, 200, 220, 250, 350, 400, 420, 450 V.DC
- Surge Voltage (SV): 200, 250, 270, 300, 400, 450, 470, 500 V.DC (corresponding to WV)
- Standard Atmospheric Conditions: Ambient temperature: 15-35, Relative humidity: 45-85%, Air Pressure: 86-106kPa
- Measurement Conditions: Ambient temperature: 202, Relative humidity: 60-70%, Air Pressure: 86-106kPa
Performance Tests (Refer to Specification for detailed conditions and criteria)
- Capacitance (Tolerance): Measured at 120Hz12Hz, 0.5Vrms, 202.
- Leakage Current: Measured after 2 minutes with a 1k10 protective resistor.
- tan: Measured at 120Hz, 0.5Vrms, 202.
- Terminal Strength: Tensile and bending strength tests applied.
- Temperature Characteristic: Impedance ratio at low temperatures, tan, and leakage current variations tested across temperature cycles.
- Load Life Test: Tested at 105C 2 with DC bias and ripple current for specified hours.
- Shelf Life Test: Stored at 1052 for 1000+48/0 hours, then tested.
- Surge Test: 1000 cycles of charge/discharge with surge voltage.
- Vibration Test: Tested across 3 mutually perpendicular directions (10Hz ~ 55Hz, 1.5mm amplitude).
- Solderability Test: Sn-Cu solder at 2503, 2mm dipping depth, 252.5mm/s, 30.5s.
- Resistance to Solder Heat Test: Terminals immersed in solder bath at 2605 for 101s or 40010 for 3+0/-1s.
- Change of Temperature Test: 5 temperature cycles (-40/-25 to +105).
- Damp Heat Test: 5008 hours at 90-95% RH, 402.
- Vent Test: For products 6.3 with vent, tested with reversed DC polarity.
- Maximum Permissible Ripple Current: Specified for various frequencies and temperatures.
Environment-related Substances
Refer to the latest document of Environment-related Substances standard (SX-WI-QA-343) for controlled substances.
Attachment: Application Guidelines
Provides detailed information on circuit design, capacitor handling, mounting considerations, electrical isolation, and precautions for use, storage, and disposal.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.