SMD common mode filter MetalLions ACM1211F-222T18 suitable for notebooks servers and battery applications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
SMD Common Mode Filters from the ACM1211F Series offer a compact and low-profile solution for preventing high-frequency common mode noise. They are designed for electronic equipment, including notebooks, servers, and battery applications, and are ideal for high-current circuits like automotive wireless charging and power devices. These filters boast excellent solderability and an operating temperature range of -40 to +125.
Product Attributes
- Brand: Metal-Lions
- Product Series: ACM1211F Series
- Certifications: RoHS Compliant
- Material: Ferrite
Technical Specifications
| Part Number | Common Mode Impedance () @100MHz | DC Resistance (m) Max | Rated Current (A) Max | Rated Voltage (V) Max | Insulation Resistance (M) Min | Packing Quantity |
| ACM1211F-800T100 | 80 | 2.0 | 10.0 | 125 | 10 | 500 pcs./reel |
| ACM1211F-301T90 | 200 | 3.0 | 9.0 | 125 | 10 | 500 pcs./reel |
| ACM1211F-501T80 | 300 | 5.0 | 8.0 | 125 | 10 | 500 pcs./reel |
| ACM1211F-701T80 | 500 | 7.0 | 6.0 | 125 | 10 | 500 pcs./reel |
| ACM1211F-801T80 | 600 | 8.0 | 8.0 | 125 | 10 | 500 pcs./reel |
| ACM1211F-102T60 | 750 | 14.0 | 6.0 | 125 | 10 | 500 pcs./reel |
| ACM1211F-222T18 | 2200 | 35.0 | 1.8 | 125 | 10 | 500 pcs./reel |
| ACM1211F-272T15 | 2300 | 50.0 | 1.5 | 125 | 10 | 500 pcs./reel |
Reliability Testing
Mechanical Tests
| Test Item | Specification | Test Details |
| Solder ability | More than 75% | The product shall be connected to the test circuit board by the fillet (the height is 0.2mm). Apply cream solder to the printed circuit board. Refer to clause 8 for Reflow profile. |
| Resistance to Soldering heat (reflow soldering) | There shall be no damage or problems. | The specimen shall be passed through the reflow oven with the condition shown in the above profile for 1 time. The specimen shall be stored at standard atmospheric conditions for 1 hour, after which the measurement shall be made. |
| Terminal strength | The terminal electrode and the ferrite must not be damaged. | Solder a chip to test substrate, and then laterally apply a load 9.8N in the arrow direction. |
| Strength on PC board bending | The terminal electrode and the ferrite must not be damaged. | Solder a chip to test substrate and then apply a load. |
Environmental Tests
| Test Item | Specification | Test Details |
| High temperature resistance | Impedance:Within20% of the initial value. Insulation resistance and DC resistance on the specification shall be met. The terminal electrode and the ferrite must not be damaged. | After the samples shall be soldered onto the test circuit board, the test shall be done. Measurement: After placing for 24 hours min. Temperature: +1252. Applied voltage: Rated voltage. Applied current: Rated current. Testing time: 50012 hours. |
| Humidity resistance | Impedance:Within20% of the initial value. Insulation resistance and DC resistance on the specification shall be met. The terminal electrode and the ferrite must not be damaged. | After the samples shall be soldered onto the test circuit board, the test shall be done. Measurement: After placing for 24 hours min. Temperature: +602, Humidity: 90 to 95 %RH. Applied voltage: Rated voltage. Applied current: Rated current. Testing time: 50012 hours. |
| Thermal shock | Impedance:Within20% of the initial value. Insulation resistance and DC resistance on the specification shall be met. The terminal electrode and the ferrite must not be damaged. | After the samples shall be soldered onto the test circuit board, the test shall be done. |
| Low temperature storage | Impedance:Within20% of the initial value. Insulation resistance and DC resistance on the specification shall be met. The terminal electrode and the ferrite must not be damaged. | After the samples shall be soldered onto the test circuit board, the test shall be done. Measurement: After placing for 24 hours min. Temperature: -402. Testing time: 50012 hours. |
| Vibration | Impedance:Within20% of the initial value. Insulation resistance and DC resistance on the specification shall be met. The terminal electrode and the ferrite must not be damaged. | After the samples shall be soldered onto the test circuit board, the test shall be done. Frequency: 10 to 55 Hz. Amplitude: 1.52 mm. Dimension and times: X, Y and Z directions for 2 hours each. |
Solderability
| Test Item | Specification | Test Details |
| Solderability | More than 75% | New solder More than 75% Flux (rosin, isopropyl alcohol{JIS-K-1522}) shall be coated over the whole of the sample before hard, the sample shall then be preheated for about 2 minutes in a temperature of 130150 and after it has been immersed to a depth 0.5mm below for 30.2 seconds fully in molten solder M705 with a temperature of 2452. More than 75% of the electrode sections shall be covered with new solder smoothly when the sample is taken out of the solder bath. |
Packaging
| Packing | Quantity | Tape width | Distance | Pull-of force |
| Tape & Reel | 500 pcs./reel | 24 mm | 16 mm | 10~120g |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina