High current molded power inductors MetalLions MMPC0503-4R7MT with carbonyl powder core and operation
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The MMPC0503 Series High Current Molded Power Inductors are designed for high-efficiency applications, featuring a compact construction with carbonyl powder cores. These inductors offer high current handling capabilities, low DCR, and operate efficiently up to 5MHz. They are particularly well-suited for PC power systems, including IMVP-6 DC/DC converters, and are characterized by very low acoustic and leakage flux noise. The series is RoHS compliant and operates within a temperature range of -40 to +125, including self-temperature rise.
Product Attributes
- Core Material: Carbonyl Powder
- Wire Material: Polyester Wire or equivalent
- Clip Material: 100% Pb free solder (Ni+Sn---Plating)
- Paint Material: Epoxy resin
- Ink Material: Halogen-free ketone
- Certifications: RoHS compliant
- Packing: Tape Carrier Package
Technical Specifications
| Part Number | Inductance (uH) 20% | I rmsA Typ | I satA Typ | DCRm Max |
|---|---|---|---|---|
| MMPC0503-R10YT | 0.1030% | 24.0 | 40.0 | 2.60 |
| MMPC0503-R15YT | 0.1530% | 22.0 | 37.0 | 3.00 |
| MMPC0503-R22MT | 0.22 | 19.0 | 32.0 | 3.80 |
| MMPC0503-R33MT | 0.33 | 15.0 | 20.0 | 5.00 |
| MMPC0503-R47MT | 0.47 | 13.0 | 18.0 | 7.10 |
| MMPC0503-R56MT | 0.56 | 12.0 | 17.0 | 8.60 |
| MMPC0503-R68MT | 0.68 | 11.0 | 15.5 | 9.00 |
| MMPC0503-R82MT | 0.82 | 10.0 | 14.0 | 10.0 |
| MMPC0503-1R0MT | 1.00 | 9.00 | 13.0 | 12.7 |
| MMPC0503-1R5MT | 1.50 | 8.00 | 11.5 | 16.6 |
| MMPC0503-2R2MT | 2.20 | 7.00 | 11.0 | 29.2 |
| MMPC0503-3R3MT | 3.30 | 6.00 | 9.00 | 38.0 |
| MMPC0503-4R7MT | 4.70 | 5.50 | 8.00 | 53.0 |
| MMPC0503-5R6MT | 5.60 | 4.70 | 7.30 | 62.0 |
| MMPC0503-6R8MT | 6.80 | 4.20 | 6.00 | 76.2 |
| MMPC0503-8R2MT | 8.20 | 3.80 | 5.00 | 97.0 |
| MMPC0503-100MT | 10.0 | 3.50 | 4.00 | 120 |
| MMPC0503-150MT | 15.0 | 2.70 | 3.20 | 190 |
| MMPC0503-220MT | 22.0 | 2.20 | 2.70 | 250 |
| Dimensions (mm) | L | G | H |
|---|---|---|---|
| 6.2 | 2.2 | 2.8 |
| Dimensions (mm) | A | B | C | D | E |
|---|---|---|---|---|---|
| 5.70.3 | 5.20.2 | 2.80.2 | 1.10.3 | 2.50.3 |
| Operating Temperature Range | -40125 (Including self temp. rise) |
|---|---|
| Test Frequency (L) | 100KHz /1.0V |
| Ambient Temperature for Testing | 25 |
| Heat Rated Current (Irms) Effect | Causes coil temperature rise approximately t of 40 (keep 1min.) |
| Saturation Current (Isat) Effect | Causes L0 to drop approximately 30% |
| Maximum Part Temperature | 125 (ambient + temp rise) |
| Rated DC Current | The lower value of Irms and Isat |
| Reliability Test Item | Performance Test Condition |
|---|---|
| Life Test | Temperature: 1252 (Inductor, ambient + temp rise), Applied current: rated current, Duration: 100012hrs. Measured at room temperature after placing for 242 hrs. |
| Load Humidity | Humidity: 852% RH, Temperature: 852, Duration: 1000hrs Min. Measured at room temperature after placing for 242 hrs. |
| Moisture Resistance | Complex multi-step process involving baking, humidity, and temperature cycling. Measured at room temperature after specified conditions. |
| Thermal shock | 500 cycles of temperature cycling between -402 and 1252. Measured at room temperature after placing for 242 hrs. |
| Vibration | Oscillation Frequency: 10Hz2KHz10Hz for 20 minutes, Total Amplitude: 10g, Testing Time: 12 hours (20 minutes, 12 cycles each of 3 orientations). |
| Bending | Component mounted on FR4 substrate, bending depth applied. Measured at room temperature. |
| Shock | 3 shocks in each direction along 3 perpendicular axes (18 shocks). Peak value: 50g's, Normal duration: 11ms, Wave form: Half-sine. |
| Terminal Strength | Force applied to the side of the device for 601 seconds. Force: (>0805inch: 1kg, |
| Soldering Method | Recommended Temperature Profile | Max Reflow Times | Max Iron Soldering Times |
|---|---|---|---|
| Solder re-flow | Refer to Figure 1 in source document. Preheat: 150, Soldering: 217, Peak: 260/10s max. | 3 times max. | N/A |
| Soldering Iron | Preheat: 150, Tip temperature: 355 (max), Tip diameter: 1.0mm (max), Soldering time: 4~5sec. | N/A | 1 time max. |
| Resistance to Soldering Heat Test | Condition | Test Time |
|---|---|---|
| Method B1 (dry heat) | 4 hrs @155C | 5 +0/-0.5 seconds |
| Method D (steam aging) | 8 hours 15 min @260C5C | 30 +0/-0.5 seconds |
| Packaging Information | Dimension | Quantity |
|---|---|---|
| Reel Dimension | 13x12mm (A: 12.4+2/-0, B: 1002, C: 13+0.5/-0, D: 330) | 2000 pcs/Reel |
| Tape Dimension (mm) | B0: 6.20.1, A0: 5.50.1, K0: 3.30.1, P: 8.00.1, W: 12.00.3, F: 5.50.1, T: 0.350.05, D: 1.50.1 | N/A |
| Tearing Off Force (Top cover tape) | 165 to 180, 10 to 130 grams | N/A |
| Application Notice | Details |
|---|---|
| Storage Conditions (component level) | Maintain solderability: MSL Level 1 (IPC/JEDEC J-STD-020D). Temperature & Humidity: |
| Transportation | Handle with care to avoid damage/contamination. Use tweezers or vacuum pick up. Minimize abrasion and mechanical shock for bulk handling. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina