Mini Molded Chip Power Inductor MetalLions MTQH322512S2R2MBTA for High Current Low Loss Applications
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
MTQH3225 Series Mini Molded Chip Power Inductors
The MTQH3225 Series Mini Molded Chip Power Inductors are designed for high-current applications with low loss, featuring a closed magnetic circuit for reduced leakage flux. Their construction utilizes metal material and vinyl thermal spray for enhanced surface compactness. These RoHS-compliant inductors are suitable for a wide range of electronic devices, including smartphones, pads, notebooks, VR/AR devices, portable gaming devices, smart wearables, and Wi-Fi modules.
Product Attributes
- Brand: Metal-Lions (inferred from URL)
- Series Name: MTQH3225
- Type: Mini Molding Chip type power inductor
- Material Code: S Type
- Coating Color: Black (B)
- Certifications: RoHS compliant
Technical Specifications
Dimensions and Land Pattern (mm)
| Series | L (mm) | G (mm) | W (mm) | T (mm) | A (Max.) | B (mm) | C (mm) | Internal Code | |
|---|---|---|---|---|---|---|---|---|---|
| MTQH322512S | 3.2 0.2 | 0.9 0.2 | 2.5 0.2 | 1.20 Max. | 1.20 | 3.25 | 0.90 | 2.55 | A, B |
| MTQH322510S | 3.2 0.2 | 0.9 0.2 | 2.5 0.2 | 1.00 Max. | 1.00 | 3.25 | 0.90 | 2.55 | A, B |
| MTQH322520S | 3.2 0.2 | 0.9 0.2 | 2.5 0.2 | 2.00 Max. | 2.00 | 3.25 | 0.90 | 2.55 | A, B |
Electrical Properties - MTQH322510S (3.2*2.5*1.0mm)
| P/N | L0 (H) @ (0A) 1MHz | Rdc (m) | Heat rating current Irms (A) | Saturation current Isat (A) | |||
|---|---|---|---|---|---|---|---|
| Typical | Max | Typical | Max | Typical | Max | ||
| MTQH322510SR33MBT | 0.33 | 11 | 15 | 8.3 | 7.8 | 8.3 | 7.8 |
| MTQH322510SR47MBT | 0.47 | 17 | 22 | 6.4 | 5.9 | 8.3 | 7.6 |
| MTQH322510SR68MBT | 0.68 | 22 | 28 | 6.2 | 5.7 | 7.5 | 7.0 |
| MTQH322510S1R0MBT | 1.0 | 25 | 30 | 5.4 | 4.9 | 6.0 | 5.3 |
| MTQH322510S1R5MBT | 1.5 | 34 | 42 | 4.0 | 3.6 | 5.0 | 4.4 |
| MTQH322510S2R2MBT | 2.2 | 55 | 66 | 3.7 | 3.4 | 4.0 | 3.5 |
| MTQH322510S3R3MBT | 3.3 | 105 | 120 | 2.7 | 2.3 | 3.7 | 3.3 |
| MTQH322510S4R7MBT | 4.7 | 125 | 140 | 2.3 | 1.9 | 2.8 | 2.5 |
| MTQH322510S6R8MBT | 6.8 | 290 | 320 | 1.9 | 1.6 | 2.4 | 2.0 |
| MTQH322510S100MBT | 10.0 | 325 | 365 | 2.2 | 1.8 | 2.2 | 1.8 |
Electrical Properties - MTQH322512S (3.2*2.5*1.2mm)
| P/N | L0 (H) @ (0A) 1MHz | Rdc (m) | Heat rating current Irms (A) | Saturation current Isat (A) | |||
|---|---|---|---|---|---|---|---|
| Typical | Max | Typical | Max | Typical | Max | ||
| MTQH322512SR10MBT | 0.10 | 5.2 | 7.0 | 12.0 | 11.0 | 18.0 | 16.5 |
| MTQH322512SR22MBT | 0.22 | 6.6 | 10 | 9.2 | 8.7 | 11.5 | 11.0 |
| MTQH322512SR24MBT | 0.24 | 7.0 | 12 | 9.0 | 8.5 | 11.0 | 10.5 |
| MTQH322512SR33MBT | 0.33 | 9.0 | 14 | 8.4 | 8.1 | 10.0 | 9.5 |
| MTQH322512SR47MBT | 0.47 | 14 | 19 | 7.5 | 7.2 | 8.6 | 8.2 |
| MTQH322512SR47MBTA | 0.47 | 11 | 14 | 7.5 | 7.2 | 8.6 | 8.2 |
| MTQH322512SR68MBT | 0.68 | 18 | 23 | 7.3 | 6.8 | 8.1 | 7.7 |
| MTQH322512SR68MBTA | 0.68 | 12 | 15 | 7.0 | 6.5 | 8.0 | 7.5 |
| MTQH322512S1R0MBT | 1.0 | 26 | 30 | 5.3 | 4.8 | 6.6 | 5.8 |
| MTQH322512S1R0MBTA | 1.0 | 18 | 21 | 5.5 | 5.0 | 7.7 | 7.0 |
| MTQH322512S1R5MBT | 1.5 | 37 | 44 | 4.7 | 4.3 | 5.1 | 4.7 |
| MTQH322512S2R2MBT | 2.2 | 58 | 70 | 3.6 | 3.0 | 4.6 | 4.2 |
| MTQH322512S2R2MBTA | 2.2 | 42 | 50 | 3.8 | 3.5 | 5.0 | 4.5 |
| MTQH322512S3R3MBT | 3.3 | 75 | 95 | 2.9 | 2.5 | 3.7 | 3.2 |
| MTQH322512S4R7MBT | 4.7 | 115 | 135 | 2.3 | 2.0 | 2.9 | 2.6 |
| MTQH322512S6R8MBT | 6.8 | 177 | 210 | 2.1 | 1.9 | 2.8 | 2.4 |
| MTQH322512S100MBT | 10.0 | 210 | 230 | 2.2 | 1.8 | 2.3 | 1.9 |
Electrical Properties - MTQH322520S (3.2*2.5*2.0mm)
| P/N | L0 (H) @ (0A) 1MHz | Rdc (m) | Heat rating current Irms (A) | Saturation current Isat (A) | |||
|---|---|---|---|---|---|---|---|
| Typical | Max | Typical | Max | Typical | Max | ||
| MTQH322520SR33MBT | 0.33 | 7.5 | 9 | 9.5 | 9.0 | 15.5 | 14.0 |
| MTQH322520SR47MBT | 0.47 | 9.0 | 10.5 | 9.5 | 8.5 | 15.0 | 13.0 |
| MTQH322520SR68MBT | 0.68 | 12.5 | 14.5 | 9.0 | 8.0 | 13.0 | 11.0 |
| MTQH322520S1R0MBT | 1.0 | 15.0 | 17.5 | 8.2 | 7.5 | 9.0 | 8.3 |
| MTQH322520S2R2MBT | 2.2 | 36.0 | 43.0 | 5.4 | 4.8 | 6.5 | 5.5 |
| MTQH322520S3R3MBT | 3.3 | 55.0 | 60.0 | 4.5 | 4.0 | 4.5 | 3.5 |
| MTQH322520S4R7MBT | 4.7 | 81.0 | 94.0 | 3.5 | 3.0 | 4.0 | 3.0 |
General Specifications
| Parameter | Value |
|---|---|
| Operating Temperature Range | -55 to +125 (Including self temp. rise) |
| Test Condition (Electrical Properties) | 1MHz, 1.0Vrms at 25 ambient |
| Irms Definition | DC current (A) that will cause an approximate T of 40. |
| Isat Definition | DC current (A) that will cause L0 to drop approximately 30%. |
| Rated Current | Either saturation current or heating current, whichever is lower. |
| Part Temperature Limit | Should not exceed 125 under worst-case operating conditions (ambient + temp rise). Verification in end application is required. |
Reliability
| Item | Requirements | Test Methods and Remarks |
|---|---|---|
| Insulation Resistance | 100M | 100 VDC between inductor coil and the middle of the top surface of the body for 60 seconds. |
| Solderability | 90% or more of electrode area shall be coated by new solder. | Dip pads in flux. Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free). Solder Temperature: 2455. Immersion Time: (51) s. |
| Resistance to Soldering Heat | No visible mechanical damage. Inductance change: Within 10%. | Dip pads in flux. Solder Composition: Sn/Ag3.0/Cu0.5(Pb-Free). Solder Temperature: 2605. Immersion Time: 101sec. |
| Adhesion of teral electrode | Strong bond between the pad and the core, without come off. | Inductors shall be subjected to (2605) for (205)s Soldering in the base with 0.3mm solder. Then apply 10 N force to electrode way for (101) seconds. |
| High temperature | No case deformation or change in appearance. Inductance change: Within 10%. | Temperature: 1252. Time: 1000 hours. Measurement at 244 hours after test conclusion. |
| Low temperature | No visible mechanical damage. Inductance change: Within 10%. | Temperature: -402. Time: 1000 hours. Measurement at 244 hours after test conclusion. |
| Thermal shock | No visible mechanical damage. Inductance change: Within 10%. | Test sample shall be placed at (-553) and (1253) for (303)s, conversion time 2~3 minutes. Cycle repeated 32 times. Placed at room temperature for 2 hours, within 484 hours of testing. |
| Temperature characteristic | Inductance change Pc-b, Pc-d: Within 20%. | a+20 b: -40 c: +20 d: +125 e: +20 . 100% P = (Lb - Lc)/Lc * 100%; P = (Ld - Lc)/Lc * 100%. |
| Static Humidity | No visible mechanical damage. Inductance change: Within 10%. | Inductors shall be subjected to (953)%RH at (602) for (10004) h. Placed at room temperature for 2 hours, within 48 hours of testing. |
| Storage test | No visible mechanical damage. Inductance change: Within 10%. | Inductors shall be stored at (852) for (10004) hours with Irms applied. Placed at room temperature for 2 hours, within 48 hours of testing. |
Recommended Reflow Soldering Profile
| Profile Feature | Parameter | Value |
|---|---|---|
| Preheat | Temperature Min (Tsmin) | 150 |
| Temperature Max (Tsmax) | 200 | |
| Time (Tsmin to Tsmax) (ts) | 60 -120 seconds | |
| Average ramp-up rate: (Ts max to Tp) | 3/ second max. | |
| Time maintained above | Temperature (TL) | 217 |
| Time (tL) | 60-150 seconds | |
| Peak Temperature (Tp) | Temperature | 260 |
| Time within 5 of actual peak Temperature (tp) | 10 seconds | |
| Ramp-down Rate | 6/second max. | |
| Time 25 to Peak Temperature | 8 minutes max. | |
| Allowed Re-flow times | 2 times | |
| Remark | To avoid discoloration phenomena of chip on terminal electrodes, please use N2 Re-flow furnace. | |
Packing Dimension of Plastic Taping (Unit: mm)
| Type | A 0.5 | B 0.5 | C 0.5 | D 1 | All |
|---|---|---|---|---|---|
| Reel | 178 | 60 | 12 | 1.5 | 3000pcs/Reel |
Taping Specifications (Unit: mm)
| Series | W 0.30 | A0 0.05 | B0 +0.1/-0 | D +0.1/-0 | D1 Min | E 0.10 | F 0.10 | K0 0.05 | P0 0.10 | P2 0.10 | P 0.10 | T 0.05 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 322510 | 8.00 | 2.90 | 3.50 | 1.50 | 1.0 | 1.75 | 3.50 | 1.20 | 4.00 | 2.00 | 4.00 | 0.23 |
| 322512 | 8.00 | 2.90 | 3.50 | 1.50 | 1.0 | 1.75 | 3.50 | 1.40 | 4.00 | 2.00 | 4.00 | 0.23 |
| 322520 | 8.00 | 2.90 | 3.50 | 1.50 | 1.0 | 1.75 | 3.50 | 2.20 | 4.00 | 2.00 | 4.00 | 0.28 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina