Wire Wound Common Mode Filter MetalLions ACW5020-152T15 for Noise Suppression in Electronic Circuits
Product Overview
The ACW- Wire Wound Type Common Mode Filter is designed for noise suppression. It is a wire-wound component that effectively reduces common mode noise in electronic circuits. This filter is suitable for various applications requiring reliable noise filtering.
Product Attributes
- Brand: Meled
- Product Type: ACW- Wire Wound Type Common Mode Filter
- Series: ACW5020-SERIES
- File No.: SP-20103001
- Material List: CORE (FERRITE), WIRE (P180 Grd1), ADHESIVE (EPOXY RESIN), SOLDER (Sn99.3:Cu0.7)
- Taping Specifications: Reel Dimensions (Unit: mm) - A: 330, B: 100, C: 13, D: 12.5, Pcs/Reel: 2500
Technical Specifications
| Meled P/N | Common mode Impedance () (Typ) | Test Frequency | Rated Voltage (V) | MAX DCR (m) | MAX Rated Current (A) | Max. IR (M) MIN | Dimensions (mm) |
| ACW5020-101T60 | 100 | 100MHz/0.5V | 50 | 13 | 6.0 | 10 | A: 4.8 0.2, B: 5.0 0.2, C: 2.5 Max, D: 0.8 Typ, E: 1.0 Typ, F: 2.3 Ref, G: 1.6 Ref, H: 0.8 Ref, I: 1.0 Ref |
| ACW5020-251T50 | 250 | 100MHz/0.5V | 50 | 20 | 5.0 | 10 | A: 4.8 0.2, B: 5.0 0.2, C: 2.5 Max, D: 0.8 Typ, E: 1.0 Typ, F: 2.3 Ref, G: 1.6 Ref, H: 0.8 Ref, I: 1.0 Ref |
| ACW5020-421T40 | 420 | 100MHz/0.5V | 50 | 27 | 4.0 | 10 | A: 4.8 0.2, B: 5.0 0.2, C: 2.5 Max, D: 0.8 Typ, E: 1.0 Typ, F: 2.3 Ref, G: 1.6 Ref, H: 0.8 Ref, I: 1.0 Ref |
| ACW5020-501T40 | 500 | 100MHz/0.5V | 50 | 27 | 4.0 | 10 | A: 4.8 0.2, B: 5.0 0.2, C: 2.5 Max, D: 0.8 Typ, E: 1.0 Typ, F: 2.3 Ref, G: 1.6 Ref, H: 0.8 Ref, I: 1.0 Ref |
| ACW5020-102T20 | 1000 | 100MHz/0.5V | 50 | 34 | 2.0 | 10 | A: 4.8 0.2, B: 5.0 0.2, C: 2.5 Max, D: 0.8 Typ, E: 1.0 Typ, F: 2.3 Ref, G: 1.6 Ref, H: 0.8 Ref, I: 1.0 Ref |
| ACW5020-142T15 | 1400 | 100MHz/0.5V | 50 | 56 | 1.5 | 10 | A: 4.8 0.2, B: 5.0 0.2, C: 2.5 Max, D: 0.8 Typ, E: 1.0 Typ, F: 2.3 Ref, G: 1.6 Ref, H: 0.8 Ref, I: 1.0 Ref |
| ACW5020-152T15 | 1500 | 100MHz/0.5V | 50 | 56 | 1.5 | 10 | A: 4.8 0.2, B: 5.0 0.2, C: 2.5 Max, D: 0.8 Typ, E: 1.0 Typ, F: 2.3 Ref, G: 1.6 Ref, H: 0.8 Ref, I: 1.0 Ref |
Reliability Testing
Operating Temperature: -40 to +125 (Contain Heating coil)
Appearance Inspection: No external defects by visual inspection.
Terminal Strength: After soldering, between copper plate and terminals of coils, push in two directions of X, Y with standing 10N(1.02kg) for 10+/-2 sec. Terminal should not peel off.
Heat endurance of reflow: Refer to soldering profile.
Insulating resistance: Over 100 M at 100V D.C. between wire and core.
Dielectric Strength: Apply at 0.5KV 3mA for 1 minute between wire and core.
Temperature characteristics: Inductance coefficient ( 0~2,000 ) 10 / ( - 40~ + 125 ).
Humidity characteristics: Inductance deviation within 10%, after 96 hours in 90~95% relative humidity at 40 2 and 1 hours drying under normal condition. A test is made under the above mentioned condition, and it is kept for 2 hours in the normal condition. After that, no mechanical and electrical defect should be found.
IR Reflow Profile
| Temperature | Time |
| 200 - 250 | 1 to 4 min |
| 255 | 10sec |
| Natural cooling | more than 2 min preheating |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.