Compact high current molded power inductors MetalLions MMPC0302-1R0MT with halogen free ketone ink and carbonyl powder core
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
MMPC0302 Series High Current Molded Power Inductors
Product Overview
The MMPC0302 Series High Current Molded Power Inductors are designed with carbonyl powder for a compact footprint, delivering high current capability with low DCR and high efficiency. These inductors operate effectively in frequency ranges up to 5MHz, making them suitable for PC power systems, including IMVP-6 DC/DC converters. They are engineered for very low acoustic noise and leakage flux noise, ensuring reliable performance in demanding applications.
Product Attributes
- Core Material: Carbonyl Powder
- Wire Material: Polyester Wire or equivalent
- Clip Material: 100% Pb free solder (Ni+Sn---Plating)
- Paint Material: Epoxy resin
- Ink Material: Halogen-free ketone
- Certifications: RoHS compliant
- Operating Temperature Range: -40125 (Including self temp. rise)
- Packing: Tape Carrier Package
Technical Specifications
Dimensions (mm):
| Series | A (mm) | B (mm) | C (mm) | D (mm) | E (mm) |
|---|---|---|---|---|---|
| MMPC0302 | 3.5 0.2 | 3.2 0.2 | 1.8 0.2 | 0.7 0.2 | 1.2 0.2 |
Recommended PC Board Pattern (mm):
| L (mm) | G (mm) | H (mm) |
|---|---|---|
| 4.1 | 1.9 | 1.45 |
Electrical Properties:
| Part Number | Inductance (uH) 20% | Irms (A) Typ | Isat (A) Typ | DCR (m) Max |
|---|---|---|---|---|
| MMPC0302-R10YT | 0.10 30% | 10.5 | 14.0 | 6.60 |
| MMPC0302-R22YT | 0.22 30% | 9.00 | 11.2 | 11.0 |
| MMPC0302-R33MT | 0.33 | 8.00 | 10.0 | 17.0 |
| MMPC0302-R47MT | 0.47 | 7.00 | 9.00 | 19.7 |
| MMPC0302-R68MT | 0.68 | 5.50 | 7.00 | 25.5 |
| MMPC0302-R82MT | 0.82 | 4.80 | 6.00 | 27.0 |
| MMPC0302-1R0MT | 1.00 | 4.00 | 5.00 | 32.0 |
| MMPC0302-1R5MT | 1.50 | 3.80 | 4.00 | 42.0 |
| MMPC0302-2R2MT | 2.20 | 3.50 | 3.70 | 65.0 |
| MMPC0302-3R3MT | 3.30 | 3.00 | 3.50 | 125 |
| MMPC0302-4R7MT | 4.70 | 2.60 | 3.00 | 172 |
| MMPC0302-5R6MT | 5.60 | 2.20 | 2.60 | 205 |
| MMPC0302-6R8MT | 6.80 | 1.90 | 2.20 | 260 |
| MMPC0302-8R2MT | 8.20 | 1.60 | 1.90 | 340 |
| MMPC0302-100MT | 10.0 | 1.40 | 1.60 | 366 |
Part Numbering Scheme:
MMPC 0302 -1R0 M T
- Product Series: Carbonyl Molding Power Inductor
- Dimensions: 0302
- Initial Inductance Value: 1R0 = 1.0uH
- Tolerance of Inductance: K=10%, L=15%, M=20%, N=25%, Y=30%
- Packing: Tape Carrier Package
Reliability and Test Conditions:
| Item | Performance Test Condition | Remarks |
|---|---|---|
| Operating Temperature | -40~+125 | |
| Storage Temperature | -40~+125 | (on board) |
| Electrical Performance Test | Inductance: Refer to standard electrical characteristics list. DCR: Refer to standard electrical characteristics list. | LCR Meter: HP4284A,CH11025,CH3302,CH1320,CH1320S Micro-Ohm Meter: CH16502,Agilent33420A |
| Saturation Current (Isat) | L30% typical. Saturation DC Current (Isat) will cause L0 to drop L(%) (keep quickly). | |
| Heat Rated Current (Irms) | Approximately T40. Heat Rated Current (Irms) will cause the coil temperature rise T() without core loss. | 1. Applied the allowed DC current (keep 1 min.). 2. Temperature measured by digital surface thermometer |
| Life Test | Temperature: 1252 (Bead) Temperature: 852 (Inductor) Applied current: rated current Duration: 100012hrs | Appearance: No damage. Inductance: within 10% of initial value. Q: Shall not exceed the specification value. RDC: within 15% of initial value and shall not exceed the specification value. Measured at room temperature after placing for 242 hrs. Preconditioning: Run through IR reflow for 2 times. |
| Load Humidity | Humidity: 852% R.H, Temperature: 852 Duration: 1000hrs Min. with 100% rated current | Measured at room temperature after placing for 242 hrs. Preconditioning: Run through IR reflow for 2 times. |
| Thermal Shock | Condition for 1 cycle: Step1: -402 305min Step2: 252 0.5min Step3: 1052 305min Number of cycles: 500 | Measured at room temperature after placing for 242 hrs. Preconditioning: Run through IR reflow for 2 times. |
| Vibration | Oscillation Frequency: 102K10Hz for 20 minutes Total Amplitude: 1.52mm10% Testing Time: 12 hours (20 minutes, 12 cycles each of 3 orientations) | Equipment: Vibration checker |
| Shock | Type: SMD Peak value (gs): 1500, Normal duration (D) (ms): 0.5, Wave form: Half-sine, Velocity change (Vi)ft/sec: 15.4 Type: Lead Peak value (gs): 100, Normal duration (D) (ms): 6, Wave form: Half-sine, Velocity change (Vi)ft/sec: 12.3 | |
| Bending | Bending depth: >=0805: 1.2mm, | Shall be mounted on a FR4 substrate of the following dimensions: >=0805: 40x100x1.2mm, |
| Solderability | Preheat: 150, 60sec. Solder: Sn99.5%-Cu0.5%. Temperature: 2455. Flux for lead free: Rosin. 9.5%. Dip time: 41sec. Depth: completely cover the termination | More than 95% of the terminal electrode should be covered with solder. |
| Resistance to Soldering Heat | Temperature (C): 260 5 (solder temp) Time(s): 10 1 | Appearance: No damage. Inductance: within 10% of initial value. Q: Shall not exceed the specification value. RDC: within 15% of initial value and shall not exceed the specification value. Number of heat cycles: 1. |
| Terminal Strength | Apply a force (>0805:1kg , | This force shall be applied gradually as not to apply a shock to the component being tested. Preconditioning: Run through IR reflow for 2 times. |
Soldering and Mounting:
Soldering Iron:
- Preheat circuit and products to 150
- Never contact the ceramic with the iron tip
- Use a 20 watt soldering iron with tip diameter of 1.0mm
- 355 tip temperature (max)
- Limit soldering time to 4~5sec.
- Iron Soldering times: 1 times max.
Reflow Soldering:
- Metal-lions terminations are suitable for re-flow soldering systems.
- Recommended temperature profiles for re-flow soldering are shown in Figure 1.
- Reflow times: 3 times max.
Packaging Information:
| Type | A (mm) | B (mm) | C (mm) | D (mm) |
|---|---|---|---|---|
| 13x12mm Reel Dimension | 12.0 0.5 | 100 2 | 13.5 0.5 | 330 |
| Series | Bo (mm) | Ao (mm) | Ko (mm) | P (mm) | W (mm) | F (mm) | t (mm) |
|---|---|---|---|---|---|---|---|
| MMPC 0302 | 3.9 0.1 | 3.6 0.1 | 2.3 0.1 | 8.0 0.1 | 12 0.3 | 5.5 0.1 | 0.35 0.05 |
Packaging Quantity:
- Chip / Reel: 3000
- Inner box: 6000
- Carton: 24000
Tearing Off Force:
Top cover tape 165 to 180
The force for tearing off cover tape is 10 to 130 grams in the arrow direction under the following conditions (referenced ANSI/EIA-481-C-2003 of 4.11 standard):
- Room Temp. (): 5~35
- Room Humidity (%): 45~85
- Room atm (hPa): 860~1060
- Tearing Speed (mm/min): 300
Application Notice:
Storage Conditions (component level):
- Metal-lions products meet IPC/JEDEC J-STD-020D standard-MSL, level 1.
- Temperature and humidity conditions: Less than 40 and 60% RH.
- Recommended products should be used within 12 months from the time of delivery.
- The packaging material should be kept where no chlorine or sulfur exists in the air.
Transportation:
- Products should be handled with care to avoid damage or contamination from perspiration and skin oils.
- The use of tweezers or vacuum pick up is strongly recommended for individual components.
- Bulk handling should ensure that abrasion and mechanical shock are minimized.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina