Compact carbonyl powder core inductors MetalLions MMPC0503-1R0MT designed for PC power systems and DC DC converters
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The MMPC0503 Series High Current Molded Power Inductors are designed for high-efficiency power systems. Featuring a compact design with carbonyl powder core, these inductors offer high current handling, low DCR, and operate effectively up to 5MHz. They are particularly suited for PC power systems, including IMVP-6 DC/DC converters, and provide very low acoustic and leakage flux noise. These inductors are RoHS compliant and operate within a temperature range of -40 to +125 (including self-temperature rise).
Product Attributes
- Core Material: Carbonyl Powder
- Wire Material: Polyester Wire or equivalent
- Clip Material: 100% Pb free solder (Ni+Sn---Plating)
- Paint Material: Epoxy resin
- Ink Material: Halogen-free ketone
- Certifications: RoHS compliant
- Packing: Tape Carrier Package
Technical Specifications
| Part Number | Inductance (uH) ± 20% | Irms (A) Typ | Isat (A) Typ | DCR (m) Max |
|---|---|---|---|---|
| MMPC0503-R10YT | 0.10 ±30% | 24.0 | 40.0 | 2.60 |
| MMPC0503-R15YT | 0.15 ±30% | 22.0 | 37.0 | 3.00 |
| MMPC0503-R22MT | 0.22 | 19.0 | 32.0 | 3.80 |
| MMPC0503-R33MT | 0.33 | 15.0 | 20.0 | 5.00 |
| MMPC0503-R47MT | 0.47 | 13.0 | 18.0 | 7.10 |
| MMPC0503-R56MT | 0.56 | 12.0 | 17.0 | 8.60 |
| MMPC0503-R68MT | 0.68 | 11.0 | 15.5 | 9.00 |
| MMPC0503-R82MT | 0.82 | 10.0 | 14.0 | 10.0 |
| MMPC0503-1R0MT | 1.00 | 9.00 | 13.0 | 12.7 |
| MMPC0503-1R5MT | 1.50 | 8.00 | 11.5 | 16.6 |
| MMPC0503-2R2MT | 2.20 | 7.00 | 11.0 | 29.2 |
| MMPC0503-3R3MT | 3.30 | 6.00 | 9.00 | 38.0 |
| MMPC0503-4R7MT | 4.70 | 5.50 | 8.00 | 53.0 |
| MMPC0503-5R6MT | 5.60 | 4.70 | 7.30 | 62.0 |
| MMPC0503-6R8MT | 6.80 | 4.20 | 6.00 | 76.2 |
| MMPC0503-8R2MT | 8.20 | 3.80 | 5.00 | 97.0 |
| MMPC0503-100MT | 10.0 | 3.50 | 4.00 | 120 |
| MMPC0503-150MT | 15.0 | 2.70 | 3.20 | 190 |
| MMPC0503-220MT | 22.0 | 2.20 | 2.70 | 250 |
| Dimensions (mm) | L | G | H | A | B | C | D | E |
|---|---|---|---|---|---|---|---|---|
| Values | 6.2 | 2.2 | 2.8 | 5.7±0.3 | 5.2±0.2 | 2.8±0.2 | 1.1±0.3 | 2.5±0.3 |
| Operating Temperature Range | -40125 (Including self temp. rise) |
|---|---|
| Test Frequency (L/Q) | 100KHz /1.0V |
| Test Ambient | 25 |
| Reliability Test Item | Performance | Test Condition |
|---|---|---|
| Life Test | Appearance: No damage. Inductance: within±10% of initial value. Q: Shall not exceed the specification value. RDC: within ±15% of initial value and shall not exceed the specification value. | Preconditioning: Run through IR reflow for 3 times. Temperature: 125±2 (Inductor, ambient + temp rise). Applied current: rated current. Duration: 1000±12hrs. Measured at room temperature after placing for 24±2 hrs. |
| Load Humidity | Inductance: with 100% rated current. | Preconditioning: Run through IR reflow for 3 times. Humidity: 85±2R.H, Temperature: 85±2. Duration: 1000hrs Min. Measured at room temperature after placing for 24±2 hrs. |
| Moisture Resistance | Appearance: No damage. Inductance: within±10% of initial value. Q: Shall not exceed the specification value. RDC: within ±15% of initial value and shall not exceed the specification value. | Preconditioning: Run through IR reflow for 3 times. Cycle 1: Baked at 50 for 25hrs. Cycle 2: 65± 2 90-100%RH in 2.5hrs, hold 3 hours, cool down to 25 in 2.5hrs. Cycle 3: 65± 2 90-100%RH in 2.5hrs, hold 3 hours, cool down to 25 in 2.5hrs, hold at 25 for 2 hrs then hold at -10 for 3 hrs. Cycle 4: Keep at 25 80-100%RH for 15min and vibrate at 10 to 55 Hz to 10 Hz. Measured at room temperature after placing for 1~2 hrs. |
| Thermal shock | Appearance: No damage. Inductance: within±10% of initial value. Q: Shall not exceed the specification value. RDC: within ±15% of initial value and shall not exceed the specification value. | Preconditioning: Run through IR reflow for 3 times. Condition for 1 cycle: Step 1: -40±2 30±5min. Step 2: 125±2 ≤0.5min. Step 3: 125±2 30±5min. Number of cycles: 500. Measured at room temperature after placing for 24±2 hrs. |
| Vibration | Appearance: No damage. Inductance: within±10% of initial value. Q: Shall not exceed the specification value. RDC: within ±15% of initial value and shall not exceed the specification value. | Preconditioning: Run through IR reflow for 3 times. Oscillation Frequency: 10Hz2KHz10Hz for 20 minutes. Total Amplitude: 10g. Testing Time: 12 hours (20 minutes, 12 cycles each of 3 orientations). |
| Bending | Appearance: No damage. Inductance: within±10% of initial value. Q: Shall not exceed the specification value. RDC: within ±15% of initial value and shall not exceed the specification value. | Mounted on a FR4 substrate. Bending depth: ≥0805 inch(2012mm):1.2mm, <0805 inch(2012mm):0.8mm. Duration of 10 sec. |
| Shock | N/A | 3 shocks in each direction along 3 perpendicular axes (18 shocks). Type: SMD, Peak value: 50g's, Normal duration: 11ms, Wave form: Half-sine, Velocity change: 11.3 ft/sec. |
| Soldering Method | Recommended Temperature Profile | Max Times |
|---|---|---|
| Solder re-flow | Pre-heating: 150, 60~180s. Soldering: 217, 60~150s. Peak Temp (260 / 10s max.). Natural Cooling. | 3 times |
| Soldering Iron | Preheat circuit and products to 150. Tip temperature: 355 (max). Tip diameter: 1.0mm (max). | 1 time max. |
| Packaging Information | Dimension | Quantity |
|---|---|---|
| Reel Dimension | 13x12mm | 2000 pcs/Reel |
| Tape Dimension (mm) | A: 6.2±0.1, B: 5.5±0.1, C: 3.3±0.1, D: 8.0±0.1, E: 12.0±0.3, F: 5.5±0.1, W: 0.35±0.05, T: 1.5±0.1 | N/A |
| Tearing Off Force (Top cover tape) | 165 to 180 | 10 to 130 grams |
| Application Notice | Details |
|---|---|
| Storage Conditions (component level) | MSL level 1 (IPC/JEDEC J-STD-020D). Temperature and humidity: Less than 40 and 60% RH. Recommended use within 12 months from delivery. Packaging material should be kept where no chlorine or sulfur exists in the air. |
| Transportation | Handle with care to avoid damage or contamination. Use of tweezers or vacuum pick up recommended. Bulk handling should minimize abrasion and mechanical shock. |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Beijing Silk Road Enterprise Management Services Co., Ltd.
Location
16 Floor, Unit B, Jiatai International Mansion, No 41, Dongsihuan Zhong Road, Chaoyang District, Beijing
Contact Person
Sellina