power management solutions featuring microgate MPIT5020-220M-LF SMD power inductor with ferrite core

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification applies to the MPIT series of SMD power inductors. These inductors are designed for various electronic applications requiring efficient power management.

Product Attributes

Brand: SHENZHEN MICROGATE TECHNOLOGY CO., LTD.
Origin: China
Material: Ferrite Core, Enameled Copper Wire, Ag/Ni/Sn/Cu Metal Layer, Magnetic Epoxy
Lead Free: Yes

Technical Specifications

Microgate Part No.	Customer Part No.	Inductance (uH)	DCR () Max.	Isat (A) Typ.	Irms (A) Typ.	SRF (MHz) Typ.
MPIT5020-R47N-LF	0.4730%	0.013	6.15	4.60	160
MPIT5020-R75N-LF	0.7530%	0.017	5.50	4.00	117
MPIT5020-1R0N-LF	1.030%	0.020	4.10	3.80	114
MPIT5020-1R2N-LF	1.230%	0.022	4.50	3.55	83
MPIT5020-1R5N-LF	1.530%	0.026	4.10	3.20	68
MPIT5020-2R2N-LF	2.230%	0.032	3.20	2.90	57
MPIT5020-2R7N-LF	2.730%	0.038	2.90	2.70	52
MPIT5020-3R0N-LF	3.030%	0.038	2.55	2.70	49
MPIT5020-3R3N-LF	3.330%	0.043	2.55	2.50	46
MPIT5020-3R6N-LF	3.630%	0.043	2.80	2.50	43
MPIT5020-3R9N-LF	3.930%	0.043	2.30	2.50	40
MPIT5020-4R3M-LF	4.320%	0.057	2.50	2.20	37
MPIT5020-4R7M-LF	4.720%	0.057	2.50	2.20	37
MPIT5020-5R1M-LF	5.120%	0.064	2.25	2.05	32
MPIT5020-5R6M-LF	5.620%	0.064	2.30	2.05	32
MPIT5020-6R8M-LF	6.820%	0.083	2.05	1.80	30
MPIT5020-7R5M-LF	7.520%	0.090	1.85	1.75	26
MPIT5020-8R2M-LF	8.220%	0.098	1.85	1.65	26
MPIT5020-9R1M-LF	9.120%	0.110	1.70	1.55	24
MPIT5020-100M-LF	1020%	0.110	1.70	1.55	24
MPIT5020-120M-LF	1220%	0.140	1.50	1.40	22
MPIT5020-150M-LF	1520%	0.165	1.35	1.25	20
MPIT5020-180M-LF	1820%	0.200	1.25	1.15	16
MPIT5020-220M-LF	2220%	0.226	1.15	1.10	14

Model	A (mm)	B (mm)	C (mm)	E (mm)	D (mm)	f (mm)	g (mm)	h (mm)
MPIT5020	5.00.2	5.00.2	2.0 Max.	2.40.2	1.30.2	2.3Typ.	5.1 Typ.	4.2 Typ.

Item	Required Characteristics	Test Method/Condition
High temperature storage test	1. No case deformation or change in appearance. 2. \|L\|/L10%	Temperature: 852 Time : 1000 hours Tested not less than 1 hours, nor more than 2 hours at room temperature.
Low temperature storage test		Temperature : -252 Time : 1000 hours Tested not less than 1 hour, nor more than 2 hours at room temperature.
Humidity test		1. Exposure : Temperature:602, Humidity : 933% RH Time : 1000 hours. 2. Tested while the specimens are still in the chamber. 3. Tested not less than 1 hour, nor more than 2 hours at room temperature.
Thermal shock test	1. No case deformation or change in appearance. 2. \|L\|/L10%	First -40 for T time, last 125 T time as 1 cycle. Go through 100 cycles.
Solderability test	Terminal area must have 90% min. solder coverage.	Dip pads in flux then dip in solder pot at 2455 for <5 second. Solder: lead free Flux: rosin flux.
Heat endurance of reflow soldering	1. No case deformation or change in appearance. 2. \|L\|/L10%	Refer to the next page reflow curve Go through 3 times. The peak temperature: 260+5/-0
Vibration test		Apply frequency 10~55Hz. 1.5mm amplitude in each of perpendicular direction for 2 hours in each 3 mutually perpendicular directions.(total 6 hours)
Drop test		Packaged & drop down from 1m with 981m/s2(100G) attitude in 1 angle 1 ridges & 2surfaces orientations.
Terminal strength push test	Pulling test: Define: Solder the products on testing PCB using eutectic solder. Then apply a force in the direction of the arrow. 10N force. Keep time 5s Bending test: Soldering the products on PCB, after the pulling test and bending test, terminal should not pull off. Bend the testing PCB at middle point, the deflection shall be 2mm. Pressurizing Speed: 0.5mm/sec, Keep time: 30 1s, 90	Ambient Temperature -40 125 30 min. 30 min. 30 min. 20sec. (max.)
Resistance to solvent test	No case deformation or change in appearance, or obliteration of marking	To dip parts into IPA solvent for 50.5Min, then drying them at room temp for 5Min., at last, to brushing marking 10 times.
Loading Under Humidity Heat	1. No case deformation or change in appearance. 2. \|L\|/L10%	1. Exposure : Temperature:602, Humidity : 93 3% RH Time : 1000 hours. Apply rated current 2. Tested while the specimens are still in the chamber. 3. Tested not less than 1 hour, nor more than 2 hours at room temperature.
Loading at High Temperature	1. No case deformation or change in appearance. 2. \|L\|/L10%	1. Temperature: 852 2. Time : 1000 hours 3. Apply rated current 4. Tested not less than 1 hours, nor more than 2 hours at room temperature.